SafMed

How to clean lumen device without automated washer disinfector, the HEGA Gun comes complete with eight (8) attachments ideal for manual cleaning of lumen devices each attachment can easily click into the Gun nozzle, an easy Plug and Play solution. Remember to be safe and wear your PPE: https://bit.ly/3RzVRRB

How do you know that your load is safe to be released? TST Control™ indicators have a clear colour change from yellow to blue, which only takes place once they have been exposed to the parameters stated on the indicator, in the presence of good quality steam.

- The TST LoadCheck, supplied by SafMed, uses the helix method as a barrier system whereby steam has to pe*****te down the helical tubing to reach the indicator at its center. The TST Control™ technology is a sensitive and accurate chemical indicator and comes in various calibrations to suit your individual cycle.

To find out more about the TST LoadCheck from SafMed, click on the link below:

TST LoadCheck Steam Designed as a pe*******on test for use in pre-vacuum steam sterilizers. It is a challenge test for determining whether saturated steam is penetrating into the lumen type device. If steam pe*****tes through the end of the tube, the indicator will show a defined colour change from yellow to blue.

: Did you know our sleek, chrome nickel-plated wire shelves are not only light and sturdy but can also hold an impressive 40-50kg per level? Designed with precision, these Chrome Wire Shelves ensure your sterile packs can breathe and cool down efficiently. Upgrade your storage solution today!

safmed.co.za

: safety. Why not try wrapping your sets with SafMed Tandem 2. Both nonwoven sheets deliver the barrier protection and sterilant permeability required for optimal sterilization of medical devices.

SafMed Tandem 2 Reliance Tandem 2 The Complete Sterile Barrier System Ahlstrom Reliance® Tandem 2 is a combination of two interleaved SMMMS sheets of nonwoven Reliance 435 Green (inner layer) and Reliance 435 Blue (outer layer), providing a superior sterile barrier syst

- How to use TST FLASH indicators? Place an indicator inside each set (ideally in the center of the set) to verify that sterilization conditions were achieved within the tray, not just in the sterilizer chamber.

Browne TST Flash Indicators (Type 6) Browne TST Flash Indicators (Type 6)

: Did you know that the Browne TST Flash Chemical Indicator is specifically designed to withstand the wet nature of a FLASH/IUSS sterilization cycle?

Browne TST Flash Indicators (Type 6) Browne TST Flash Indicators (Type 6)

: Using SafMed Tray Liners Correctly

Using tray liners correctly is a small step that makes a big impact on sterility outcomes, instrument protection, and wet-pack reduction.