Tinker I.T Makerspace Design and Consulting

Tinker I.T Makerspace Design and Consulting Tinker IT Maker Space Design provides consulting and design work for K-12, Secondary, and Post-Grad e

The play surface and rails are in the The client went with a matching vegan suede which I coated in Scotch guard for th...
07/17/2022

The play surface and rails are in the
The client went with a matching vegan suede which I coated in Scotch guard for the future drink holders.

Under the suede is old school 1/16" headliner material which really made a difference in the play feeling.

The holes in the rails are for giant neo magnets to hold components and drinks.

I drilled a forsner but just to the skin.
There are inset nuts in the base to pull the top tight.

The "stain" is light leak from the window.


https://instagr.am/p/CgHzI5TLMG0/

Progress update on the .Frame and walls are 15-ply stained titan oakinstead of milled hardwood and you will see why ...
07/15/2022

Progress update on the .
Frame and walls are 15-ply stained titan oak
instead of milled hardwood and you will see why soon.
There are 1.25" magnets in the rails to hold components and cupholders.

Time to go choose the play surface and waterproof it.
Measurements are 6'x3' surface and 7'x4' outer.
Next is running wirws through the rails and steel frame.
https://instagr.am/p/CgCWg3er9dn/

Finally an update on the The holes in the rail are 1.5" neodymium magnets to hold accessories.There will be in the di...
05/20/2022

Finally an update on the
The holes in the rail are 1.5" neodymium magnets to hold accessories.
There will be in the diamonds in the steel legs.
Titan oak stain and urethane clear.
Baltic birch railes, frame and base.
Can't wait to show the lights in the rails.
Faux suede top coming soon.
https://instagr.am/p/CdyLU-LrwJ5/

Part 3 of the build is remote control.40a solid state relay at the Delta which powers the collector and a 12v LED powe...
02/24/2022

Part 3 of the build is remote control.
40a solid state relay at the Delta which powers the collector and a 12v LED power supply.
Input is a 5v phone charger going to a switch holder.
All runs over 20ga 4 conductor to each drop.
https://instagr.am/p/CaW-TUwuVWi/

Time to upgrade the system at .I'm taking the 4" hoses and splitting 3way to 2.5" outputs and I designed magnetic ca...
02/23/2022

Time to upgrade the system at .
I'm taking the 4" hoses and splitting 3way to 2.5" outputs and I designed magnetic caps with a little silicon to seal it up.
https://instagr.am/p/CaVIKXLv9Ri/

Finally got the cutting board almost done.I went with my normal design of The square tube was held with for the pe...
11/30/2021

Finally got the cutting board almost done.

I went with my normal design of

The square tube was held with for the perfect 90, coated with penetrol for rust protection

I learned that Goofoff sticker remover does great for removing mill scale for a clean look.

Birch ply fed through my engraved with website info.

Stands are a mix of tube steel, round bar, and rebar.


https://instagr.am/p/CW54IJQLGVZ/

My covid update: Hey all, I've been silent for a while trying to figure things out when covid cancelled all my speaking ...
05/08/2020

My covid update: Hey all, I've been silent for a while trying to figure things out when covid cancelled all my speaking gigs, classes, marketing, swap meets, etc So, the long and short of it is that and are going back to part time for a little while. I used to get one or two recruiter a week asking me to take jobs, but I loved mine too much. I said yes to one on April first and I'm finishing my first week doing training videos for this IT company and I'm going to stick with it a while. JoJaqs isn't dead. I'm actually doing a live session at in July and still working on projects in my off hours. I just finished a school design in Maryland for TinkerIT and I'll upload pictures soon of that. !!!! If you're a Maker and read this far and wanted to take one of my classes and couldn't afford it or catch one at the right time, comment on this post and tag someone who you want to do a class with and I will do a free live seminar as I practice for Haven. Thanks for reading. No extra hashtags on this one so I only get my followers the free classes. https://instagr.am/p/B_7YBw9A7Xo/

Check out the first 360 render of the future makerspace at Chapelgate Christian Academy in MD we are currently working o...
03/30/2020

Check out the first 360 render of the future makerspace at Chapelgate Christian Academy in MD we are currently working on.

you think you're done with a project and about to call the client to pick it up, but yell the f word instead Where's...
12/18/2019

you think you're done with a project and about to call the client to pick it up, but yell the f word instead Where's the ? It's going to be a long day at https://ift.tt/2r9F956

It's down to the final days to get custom ornaments and coasters made by Christmas. Custom ornaments are $15 and coaster...
12/17/2019

It's down to the final days to get custom ornaments and coasters made by Christmas. Custom ornaments are $15 and coasters are $20. . Or I have a stock of elf and vacation movie ornaments for $5 along with some humor ones. PM me for info. https://ift.tt/36LhzdX

Today's project was from a class at The student wanted of and for her I think I'm going to make some fo...
12/02/2019

Today's project was from a class at The student wanted of and for her I think I'm going to make some for the pop up market this weekend out of my earring shapes. PM me on here if you want some before your . . . https://ift.tt/33EN9s0

Address

Indian Trail
Indian Trail, NC

Website

Alerts

Be the first to know and let us send you an email when Tinker I.T Makerspace Design and Consulting posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The School

Send a message to Tinker I.T Makerspace Design and Consulting:

Shortcuts

Share

Category