MetaFacturing

03/02/2026

🎯Digital Transformation on the Shop Floor: MetaFacturing Project at LTH Castings

We’re proud to share the successful completion of the METAFACTURING project at LTH Castings, a strong example of how digital transformation can directly impact manufacturing performance.

- 𝗢𝗯𝗷𝗲𝗰𝘁𝗶𝘃𝗲
Bringing digital transformation to the shop floor to improve both quality and operational efficiency.

- 𝗗𝗮𝘁𝗮 𝗜𝗻𝘁𝗲𝗴𝗿𝗮𝘁𝗶𝗼𝗻
LTH Castings played a key role as a data provider, connecting critical production and process data to increase transparency and traceability across operations.

- 𝗞𝗲𝘆 𝗢𝘂𝘁𝗰𝗼𝗺𝗲𝘀
▪ Scrap reduction
▪ Process performance optimization
▪ High-quality cast parts

- 𝗜𝗺𝗽𝗹𝗲𝗺𝗲𝗻𝘁𝗮𝘁𝗶𝗼𝗻 & 𝗥𝗲𝘀𝘂𝗹𝘁𝘀
In the final phase, advanced analytics were validated under near-real-time conditions. Operators are now supported by an intuitive dashboard that transforms complex data into clear, actionable insights—empowering better and faster decision-making on the shop floor.

▶️ Watch the 𝗳𝘂𝗹𝗹 𝘃𝗶𝗱𝗲𝗼 𝗵𝗲𝗿𝗲:
https://youtu.be/nTptopkHuRc

Nyd de videoer og den musik, du holder af, upload originalt indhold, og del det hele med venner, familie og verden på YouTube.

21/01/2026

🔧 MetaFacturing – 𝗨𝘀𝗲 𝗖𝗮𝘀𝗲: 𝗖𝗮𝘀𝘁𝗶𝗻𝗴 & 𝗪𝗲𝗹𝗱𝗶𝗻𝗴 | 𝗨𝗽𝗱𝗮𝘁𝗲 #𝟭
In this update, we showcase the progress of the casting and welding use case, highlighting how digitalization and real-time data are optimizing industrial processes and driving the transition towards Industry 4.0.

🎥 Watch the video and follow the project.
www.youtube.com/watch?v=7EuefrYpIXk

🎥 Our Metafacturing project aims to revolutionize manufacturing processes, mainly welding and casting by leveraging smart data. 🤖✨

20/01/2026

🎬 MetaFacturing–𝗙𝗶𝗻𝗮𝗹 𝗢𝘃𝗲𝗿𝘃𝗶𝗲𝘄 𝗩𝗶𝗱𝗲𝗼 𝗡𝗼𝘄 𝗔𝘃𝗮𝗶𝗹𝗮𝗯𝗹𝗲
We are pleased to announce that the final overview and update video of the is now available.

This video provides a comprehensive summary of the project, highlighting its objectives, key developments, achieved results, and overall impact. It reflects the collaborative effort, innovation, and commitment of all partners involved throughout the project lifecycle.

📌 Watch the video below to learn more about the final outcomes and insights from the MetaFacturing.
www.youtube.com/watch?v=4H2uP2R4Fy8

We would like to thank everyone who contributed to making this project a success. 👏

Nyd de videoer og den musik, du holder af, upload originalt indhold, og del det hele med venner, familie og verden på YouTube.

26/11/2025

🚀 Metafacturing Featured at 𝗜𝗦𝗠 𝟮𝟬𝟮𝟱
On 12 November, the METAFACTURING project was showcased at the 𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗖𝗼𝗻𝗳𝗲𝗿𝗲𝗻𝗰𝗲 𝗼𝗻 𝗜𝗻𝗱𝘂𝘀𝘁𝗿𝘆 𝟰.𝟬 𝗮𝗻𝗱 𝗦𝗺𝗮𝗿𝘁 𝗠𝗮𝗻𝘂𝗳𝗮𝗰𝘁𝘂𝗿𝗶𝗻𝗴 (𝗜𝗦𝗠 𝟮𝟬𝟮𝟱) in Malta — a leading global forum for digital transformation and smart production technologies.

The presentation, “Data and Metadata for Advanced Digitalization of Manufacturing Industrial Lines”, was delivered by Roxana Holom, 𝗗𝗮𝘁𝗮 𝗦𝗰𝗶𝗲𝗻𝗰𝗲 𝗣𝗿𝗼𝗷𝗲𝗰𝘁 𝗠𝗮𝗻𝗮𝗴𝗲𝗿 & 𝗥𝗲𝘀𝗲𝗮𝗿𝗰𝗵𝗲𝗿 at RISC Software GmbH, a key project partner. It explored how structured data and metadata can drive smarter, more efficient industrial manufacturing lines, sharing cutting-edge research insights and real-world applications from the Metafacturing collaboration.

This participation reinforces Metafacturing’s commitment to advancing intelligent manufacturing, accelerating Industry 4.0 adoption, and strengthening European innovation in smart industrial systems.

20/11/2025

Wishing you 𝗷𝗼𝘆𝗳𝘂𝗹 𝗵𝗼𝗹𝗶𝗱𝗮𝘆𝘀 and a 𝗯𝗿𝗶𝗴𝗵𝘁 𝘆𝗲𝗮𝗿 𝗮𝗵𝗲𝗮𝗱!❄️

The MetaFacturing Project wishes all our partners and followers a joyful holiday season and a 2026 full of new opportunities, innovation, and success.

Thank you for being part of this journey with us.

16/10/2025

📍This week, 𝗕𝘂𝗿𝗴𝗼𝘀 became the epicentre of industrial innovation with the 𝟱𝘁𝗵 𝗕𝘂𝗿𝗴𝗼𝘀 𝗜𝗻𝗱𝘂𝘀𝘁𝗿𝗶𝗮 𝟰.𝟬 𝗠𝗲𝗲𝘁𝗶𝗻𝗴

MetaFacturing was proud to take part in this key event, together with the DiMAT and PIONEER Project, presenting concrete results and sharing an exhibition stand that showcased how European R&D is driving digital transformation, data-driven design, and sustainable manufacturing.

💡 At the 𝗙𝗼𝗿𝘂𝗺 𝗘𝘃𝗼𝗹𝘂𝗰𝗶𝗼𝗻 𝗕𝘂𝗿𝗴𝗼𝘀, we highlighted how these two projects are reshaping industrial ecosystems through open innovation, AI-powered tools, and collaborative research.

18/09/2025

🔧 Day 1 Highlights from SCHWEISSEN & SCHNEIDEN 2025
At the world’s leading trade fair for joining, cutting, and surfacing technologies, an important industry theme was set right from the start.

During his presentation “METAFACTURING: Advanced digitalisation for industrial production”, Hannes Hinterbichler (Fronius International) unveiled the latest results of the EU-funded METAFACTURING project, which has been running for 3 years.

📊 By capturing and analysing welding process data on industrial production lines, the project enables:
- Early detection of defects and anomalies
- Reduced quality control costs and rejection rates
- Training of machine learning models to predict weld quality → paving the way for predictive maintenance

💡 The key message: If valuable data is generated during welding, why not use it? Efficiency gains rely directly on data traceability and quality — and research shows the potential is already there.

📍 Visit the METAFACTURING booth 3B63.1 at MESSE ESSEN GmbH to see the live demonstrator, explore the project’s results, and experience first-hand how advanced digitalisation adds real value for industry.
_______________________________________________________________________

16/09/2025

🔧 Yesterday at SCHWEISSEN & SCHNEIDEN 2025!

The MetaFacturing Project Workshop & Roundtable took place yesterday, September 15th, at the Fronius International booth (3B63).

💡 During this session, Dr. Hannes Hinterbichler (Fronius International) presented the project’s key results, showcasing the development of a digitized toolchain for metal part production.

Key highlights included:
✅ Digital Twin-based process setup and control
✅ Model-based data fusion for smarter decision-making
✅ Continuous Life Cycle Assessment for sustainability
✅ Demonstrators validating the approach in industrial settings

🌍 These innovations aim to enhance production resilience, reduce scrap, and optimize the use of resources—especially recycled materials.

👏A big thank you to everyone who joined the discussion and contributed to exploring the applicability of these solutions across diverse industrial contexts!

15/09/2025

🚀 It starts today!
MetaFacturing is live at SCHWEISSEN & SCHNEIDEN 2025, the world’s leading trade fair for joining, cutting, and surfacing technologies.

📍 Visit us at 𝗕𝗼𝗼𝘁𝗵 3B63.1 at Messe Essen and explore our innovative solutions shaping the future of manufacturing.

👉 Don’t miss your chance to grab some exclusive giveaways 🎁 and connect with us.

We look forward to innovating, collaborating, and building the future together!

09/09/2025

⏳ Only 1 week to go until 𝗦𝗖𝗛𝗪𝗘𝗜𝗦𝗦𝗘𝗡 & 𝗦𝗖𝗛𝗡𝗘𝗜𝗗𝗘𝗡 𝟮𝟬𝟮𝟱!

We are excited to announce that the MetaFacturing Project will be featured at this world-leading trade fair for joining, cutting, and surfacing technologies.

📅 September 15–19, 2025
📍 Essen, Germany
📌 Booth: 3B63.1

The MetaFacturing team will showcase innovative solutions in digital manufacturing, including:
🔹 Digital twin applications to boost production efficiency
🔹 AI-driven optimization for more sustainable manufacturing
🔹 Circular economy principles driving the future of the industry

We warmly invite professionals, researchers, and stakeholders to visit us at Booth 3B63.1 and explore how digital technologies are shaping the future of manufacturing.

🚀 Let’s meet in Essen—just one week to go!

08/09/2025

MetaFacturing will be attending SCHWEISSEN & SCHNEIDEN 2025, the world’s leading trade fair for joining, cutting, and surfacing technologies!

📍 Visit us at 𝗕𝗼𝗼𝘁𝗵 3B63.1 at Messe Essen and discover our innovative solutions shaping the future of manufacturing.

👉 Don’t miss the chance to grab some 𝗲𝘅𝗰𝗹𝘂𝘀𝗶𝘃𝗲 𝗴𝗶𝘃𝗲𝗮𝘄𝗮𝘆𝘀🎁 — we look forward to welcoming you!

🔗 Join us for this unique opportunity to 𝗰𝗼𝗻𝗻𝗲𝗰𝘁, 𝗶𝗻𝗻𝗼𝘃𝗮𝘁𝗲, and 𝗰𝗼𝗹𝗹𝗮𝗯𝗼𝗿𝗮𝘁𝗲.

26/08/2025

🔧 This September, MetaFacturing will be at SCHWEISSEN & SCHNEIDEN

2025 — the world’s leading trade fair for joining, cutting, and surfacing.

We’ll be showcasing how we’re shaping the future of intelligent manufacturing through innovative solutions developed within our projects.

📆 Date: September 15–19
📍 Booth: 3B63.1
🎤 Peter Daniel, Product Manager at VITRONIC Machine Vision.

👉 Come visit us and discover what we’re building for the future of manufacturing!