05/10/2015
General Codes:
* #06 # – Display’s IMEI number.
*2767*3855 # – This code will Format your device
to factory state (will delete everything on phone).
* #* #4636 #* #* – Display’s Phone information,
usage statistics and battery.
* #* #273282*255*663282* #* #* – This code will
Immediately backup of all media files.
* #* #197328640 #* #* – This code will Enable test
mode for service.
* #* #1111 #* #* – Will display FTA software version.
* #* #1234 #* #* – Will show PDA and firmware
version.
* #* #232339 #* #* – Wireless LAN tests.
* #* #0842 #* #* – This code is used for Backlight/
vibration test.
* #12580*369 # – Display’s Software and hardware
info.
* #* #2664 #* #* – This code is used for Testing the
touchscreen.
* #9900 # – System dump mode.
* #9090 # – Diagnostic configuration.
* #* #34971539 #* #* – Will display Detailed camera
information.
* #872564 # – USB logging control.
* #301279 # – HSDPA/HSUPA Control Menu.
* #7465625 # – This code will display phone’s lock
status.
* #0* # – Enter the service menu on newer phones
like Galaxy S III.
* #* #7780 #* #* – Reset the /data partition to factory
state.
Basic Codes:
* #* #7780 #* #* – This code is used for factory
restore setting.This will remove Google account
setting and System and application data and
settings.
*2767*3855 # – This code is used for factory
format, and will remove all files and settings
including the internal memory storage. It will also
re install the firmware.
* #* #4636 #* #* – This code show information about
your phone and battery.
* #* #273283*255*663282* #* #* – This code opens
a File copy screen where you can backup your
media files e.g. Images, Sound, Video and Voice
memo.
* #* #197328640 #* #* – This code can be used to
enter into Service mode. You can run various tests
and change settings in the service mode.
* #* #7594 #* #* – This code enable your “End call /
Power” button into direct power off button without
asking for selecting any option(silent mode, aero
plane and power-off).
* #* #8255 #* #* – This code can be used to launch
G Talk Service Monitor.
* #* #34971539 #* #* – This code is used to get
camera information. Please avoid update camera
firmware option.
W-LAN, GPS and Bluetooth Test Codes:
* #* #232339 #* #* OR * #* #526 #* #* OR * #* #528 #* #*
– W-LAN test (Use “Menu” button to start various
tests).
* #* #232338 #* #* – Shows WiFi MAC address.
* #* #1472365 #* #* – GPS test.
* #* #1575 #* #* – Another GPS test.
* #* #232331 #* #* – Bluetooth test.
* #* #232337 #* # – Shows Bluetooth device
address.
Codes to launch various Factory Tests:
* #* #0842 #* #* – Device test (Vibration test and
BackLight test).
* #* #0588 #* #* – Proximity sensor test.
* #* #0* #* #* – LCD test.
* #* #2664 #* #* – Touch screen test.
* #* #2663 #* #* – Touch screen version.
* #* #0283 #* #* – Packet Loopback.
* #* #0673 #* #* OR * #* #0289 #* #* – Melody test.
* #* #3264 #* #* – RAM version.
Code for firmware version information:
* #* #1111 #* #* – FTA SW Version.
* #* #2222 #* #* – FTA HW Version.
* #* #44336 #* #* – PDA, Phone, CSC, Build Time,
Changelist number.
* #* #4986*2650468 #* #* – PDA, Phone, H/W,
RFCallDate.
* #* #1234 #* #* – PDA and Phone.