i2i Makerspace by UPV Regional Research Center

Makerspace Machine Fundamentals: Introduction to 3D Printing and Vacuum Forming hosted by the UPV Regional Research Center (RRC) – i2i Makerspace. 14 May 2026

Transform your ideas into reality with the 𝐕𝐚𝐜𝐮𝐮𝐦 𝐅𝐨𝐫𝐦𝐢𝐧𝐠 𝐌𝐚𝐜𝐡𝐢𝐧𝐞🛠️✨

From custom packaging and dental models to prop making and rapid prototyping, achieve professional-grade results with precise control and advanced material support (up to 3mm).

🚀 Ready to start?
Visit us at the UPV Regional Research Center for a consultation or material guidance.

📧 Inquiries: [email protected]

𝑹𝒆𝒂𝒍𝒊𝒛𝒊𝒏𝒈 𝑹𝒆𝒔𝒆𝒂𝒓𝒄𝒉 𝑪𝒂𝒑𝒂𝒄𝒊𝒕𝒊𝒆𝒔: 𝑬𝒎𝒑𝒐𝒘𝒆𝒓𝒊𝒏𝒈 𝒕𝒉𝒆 𝑵𝒆𝒙𝒕 𝑮𝒆𝒏𝒆𝒓𝒂𝒕𝒊𝒐𝒏 𝒐𝒇 𝑺𝒄𝒊𝒆𝒏𝒕𝒊𝒔𝒕𝒔
The Materials Science and Nanotechnology Laboratory successfully conducted a specialized training on “𝗕𝗮𝘀𝗶𝗰 𝗣𝗿𝗶𝗻𝗰𝗶𝗽𝗹𝗲𝘀 𝗮𝗻𝗱 𝗢𝗽𝗲𝗿𝗮𝘁𝗶𝗼𝗻𝘀 𝗼𝗳 𝗦𝗰𝗮𝗻𝗻𝗶𝗻𝗴 𝗘𝗹𝗲𝗰𝘁𝗿𝗼𝗻 𝗠𝗶𝗰𝗿𝗼𝘀𝗰𝗼𝗽𝘆 – 𝗘𝗻𝗲𝗿𝗴𝘆 𝗗𝗶𝘀𝗽𝗲𝗿𝘀𝗶𝘃𝗲 𝗫-𝗿𝗮𝘆 𝗦𝗽𝗲𝗰𝘁𝗿𝗼𝘀𝗰𝗼𝗽𝘆 (𝗦𝗘𝗠-𝗘𝗗𝗦)” last May 5, 2026, at the Regional Research Center.

Choosing the right infill density and infill pattern!
Strength. Speed. Sustainability.

UPV students gained hands-on experience with 3D printing and toured the 3D scanning and vacuum forming instruments at the i2i Makerspace. The technical immersion session was guided by their faculty member Dr. Jumar G. Cadondon.

The Calibry 3D Scanner is here to bridge the gap between the physical and digital worlds! 🌐✨

From intricate artifacts to large-scale prototypes, our professional-grade handheld scanner captures every detail in high resolution.

Why choose the Calibry 3D Scanner?
✅ High Speed: Capture up to 35 frames per second!
✅ Built-in Touchscreen: See your scan in real-time.
✅ Versatile: 3 tracking modes for geometry, texture, or markers.
✅ Unlimited Scaling: Scan anything from small parts to full-sized cars.
✅ Precision: Accuracy up to 0.1mm for your most detailed projects.

Perfect for Reverse Engineering, Quality Control, Digital Archiving, and Creative Design.

🔗 𝐒𝐞𝐜𝐮𝐫𝐞 𝐘𝐨𝐮𝐫 𝐒𝐥𝐨𝐭 𝐍𝐨𝐰:
Register here: https://forms.gle/2SYkCzReEh7c8NE39

⚠️ Important Note
This workshop is FREE, but we are strictly limiting slots to ensure everyone gets quality time with the machines

🛠️ LEVEL UP YOUR MAKING SKILLS! 🛠️
Ready to turn your digital designs into physical reality? Join us at the UPV Regional Research Center - i2i Makerspace for 1-day training workshop.

𝐌𝐚𝐤𝐞𝐫𝐬𝐩𝐚𝐜𝐞 𝐌𝐚𝐜𝐡𝐢𝐧𝐞 𝐅𝐮𝐧𝐝𝐚𝐦𝐞𝐧𝐭𝐚𝐥𝐬: 𝐈𝐧𝐭𝐫𝐨𝐝𝐮𝐜𝐭𝐢𝐨𝐧 𝐭𝐨 𝟑𝐃 𝐏𝐫𝐢𝐧𝐭𝐢𝐧𝐠 & 𝐕𝐚𝐜𝐮𝐮𝐦 𝐅𝐨𝐫𝐦𝐢𝐧𝐠

Whether you're a student, researcher, or hobbyist, this workshop will equip you with the essential skills to operate our core machines safely and effectively.

📅 𝐓𝐫𝐚𝐢𝐧𝐢𝐧𝐠 𝐃𝐞𝐭𝐚𝐢𝐥𝐬
When: 13 May 2026 (Wednesday)
Time: 08:30 AM – 04:30 PM
Where: UPV RRC - i2i Makerspace, Miagao, Iloilo

🔍 𝐖𝐡𝐚𝐭 𝐘𝐨𝐮’𝐥𝐥 𝐋𝐞𝐚𝐫𝐧
3D Printing: From slicer software settings to bed leveling and filament management.
Vacuum Forming: Mastering the basics of mold creation and plastic sheet thermoforming.

🔗 𝐒𝐞𝐜𝐮𝐫𝐞 𝐘𝐨𝐮𝐫 𝐒𝐥𝐨𝐭 𝐍𝐨𝐰:
Register here: https://forms.gle/2SYkCzReEh7c8NE39

⚠️ Important Note
This workshop is FREE, but we are strictly limiting slots to ensure everyone gets quality time with the machines

🛠️ LEVEL UP YOUR MAKING SKILLS! 🛠️
Ready to turn your digital designs into physical reality? Join us at the UPV Regional Research Center - i2i Makerspace for 1-day training workshop.

𝐌𝐚𝐤𝐞𝐫𝐬𝐩𝐚𝐜𝐞 𝐌𝐚𝐜𝐡𝐢𝐧𝐞 𝐅𝐮𝐧𝐝𝐚𝐦𝐞𝐧𝐭𝐚𝐥𝐬: 𝐈𝐧𝐭𝐫𝐨𝐝𝐮𝐜𝐭𝐢𝐨𝐧 𝐭𝐨 𝟑𝐃 𝐏𝐫𝐢𝐧𝐭𝐢𝐧𝐠 & 𝐕𝐚𝐜𝐮𝐮𝐦 𝐅𝐨𝐫𝐦𝐢𝐧𝐠

Whether you're a student, researcher, or hobbyist, this workshop will equip you with the essential skills to operate our core machines safely and effectively.

📅 𝐓𝐫𝐚𝐢𝐧𝐢𝐧𝐠 𝐃𝐞𝐭𝐚𝐢𝐥𝐬
When: 13 May 2026 (Wednesday)
Time: 08:30 AM – 04:30 PM
Where: UPV RRC - i2i Makerspace, Miagao, Iloilo

🔍 𝐖𝐡𝐚𝐭 𝐘𝐨𝐮’𝐥𝐥 𝐋𝐞𝐚𝐫𝐧
3D Printing: From slicer software settings to bed leveling and filament management.
Vacuum Forming: Mastering the basics of mold creation and plastic sheet thermoforming.

🔗 𝐒𝐞𝐜𝐮𝐫𝐞 𝐘𝐨𝐮𝐫 𝐒𝐥𝐨𝐭 𝐍𝐨𝐰:
Register here: https://forms.gle/2SYkCzReEh7c8NE39

⚠️ Important Note
This workshop is FREE, but we are strictly limiting slots to ensure everyone gets quality time with the machines

Another batch of UPV Computer Science students engaged in hands-on 3D printing, learning the basic fundamentals and bringing ideas to life!

With Engr. Vincent Fuentes as resource person and guided by their adviser, Asst. Prof. Reilly Bautista. The activity was held at the UPV Regional Research Center, 08 April 2026.

UPV BS Computer Science students conducted their hands-on 3D printing activity at the i2i Makerspace as part of their class under Asst. Prof. Reilly Bautista, with Engr. Vincent Fuentes serving as resource person.
March 11, 2026.