Adamson University-Additive Manufacturing Center for Industrial Ceramics

𝐂𝐚𝐠𝐚𝐲𝐚𝐧 𝐒𝐭𝐚𝐭𝐞 𝐔𝐧𝐢𝐯𝐞𝐫𝐬𝐢𝐭𝐲 𝐄𝐱𝐩𝐥𝐨𝐫𝐞𝐬 𝐈𝐧𝐧𝐨𝐯𝐚𝐭𝐢𝐨𝐧 𝐚𝐭 𝐀𝐝𝐚𝐦𝐬𝐨𝐧 𝐔𝐧𝐢𝐯𝐞𝐫𝐬𝐢𝐭𝐲 𝐄𝐧𝐠𝐢𝐧𝐞𝐞𝐫𝐢𝐧𝐠 𝐋𝐚𝐛𝐬

CSU visits Adamson University’s Engineering Laboratories! Adamson University-Additive Manufacturing Center for Industrial Ceramics warmly welcomed the guests and gave an insightful introduction to the cutting edge equipment and machinery, showcasing innovation in action.

Adamson University Mechanical Engineering Department

Stay connected with us, Klasmeyts! 🦅
Contact us:
📧[email protected]
🔗 For updates and announcements, click here:https://www.facebook.com/share/NSGy4A8uNFBfrXQS/?mibextid=

𝐋𝐨𝐨𝐤𝐢𝐧𝐠 𝐟𝐨𝐫 𝐮𝐧𝐢𝐪𝐮𝐞 𝐠𝐢𝐯𝐞𝐚𝐰𝐚𝐲𝐬 𝐚𝐧𝐝 𝐩𝐞𝐫𝐤𝐬? 👀

Worry no more because with AMCeram 3D printing, we’ve got you covered! Yes you read it right from custom gifts to event freebies, AMCeram offers that too!

Crafted with creativity, precision, and innovation. ✨

Adamson University Mechanical Engineering Department

Stay connected with us, Klasmeyts! 🦅
Contact us:
📧[email protected]
🔗 For updates and announcements, click here:https://www.facebook.com/share/NSGy4A8uNFBfrXQS/?mibextid=

𝟑𝑫 𝑷𝒓𝒊𝒏𝒕 𝒚𝒐𝒖𝒓 𝒈𝒊𝒇𝒕𝒔 𝒏𝒐𝒘 𝑲𝒍𝒂𝒔𝒎𝒆𝒚𝒕!🫶

𝗕𝗲𝘁𝘁𝗲𝗿 𝗹𝗮𝘁𝗲 𝘁𝗵𝗮𝗻 𝗻𝗲𝘃𝗲𝗿 🤗

A warm welcome to our 1st Year Falcons and our former klasmeyt back at Adamson! 💙. It may be late, but as they say, better late than never!. So don’t wait and hesitate no more because AMCeram is here, waiting for you. Come and experience the innovative world of AMCeram!

Adamson University Mechanical Engineering Department

Stay connected with us, Klasmeyts! 🦅
Contact us:
📧[email protected]
🔗 For updates and announcements, click here:https://www.facebook.com/share/NSGy4A8uNFBfrXQS/?mibextid=





𝑺𝒆𝒄𝒖𝒓𝒆 𝒚𝒐𝒖𝒓 𝒔𝒄𝒉𝒆𝒅𝒖𝒍𝒆 𝒂𝒕 𝑶𝒁 𝟏𝟎𝟖 𝒏𝒐𝒘🗓️

Congratulations! Adamson University New Vincentian Mechanical Engineers! ⚙️💙

𝗕𝘂𝗶𝗹𝗱𝗶𝗻𝗴 𝗕𝗿𝗶𝗱𝗴𝗲𝘀 𝗶𝗻 𝗘𝗻𝗴𝗶𝗻𝗲𝗲𝗿𝗶𝗻𝗴 𝗘𝗱𝘂𝗰𝗮𝘁𝗶𝗼𝗻

Today, August 28, 2025, marked another connection between Adamson University and Baliuag University as its faculty and students visited Adamson University’s Engineering Laboratory, including the Additive Manufacturing Center for Industrial Ceramics (AMCeram). The visit was led by the Chairperson of the Mechanical Engineering Department, Engr. Lester Alred M. Olasiman. This engagement goes beyond a simple visit, it aims to strengthen the partnership between the two institutions while promoting flexible and accessible knowledge-sharing that empowers students in the field of engineering and beyond

Adamson University Mechanical Engineering Department

Stay connected with us, Klasmeyts! 🦅
Contact us:
📧[email protected]
🔗 For updates and announcements, click here:https://www.facebook.com/share/NSGy4A8uNFBfrXQS/?mibextid=

𝑲𝒏𝒐𝒘𝒍𝒆𝒅𝒈𝒆 𝒈𝒓𝒐𝒘𝒔 𝒃𝒆𝒔𝒕 𝒘𝒉𝒆𝒏 𝒊𝒕 𝒊𝒔 𝒔𝒉𝒂𝒓𝒆𝒅, 𝒏𝒐𝒕 𝒄𝒐𝒏𝒇𝒊𝒏𝒆𝒅

Congratulations to the Graduates of the Adamson University Mechanical Engineering Department Dual Degree Program and Minghsin University of Science and Technology (MUST), Taiwan! 🎉🎓

June 7, 2025, Hsinchu County, Taiwan: Adamson University made a significant presence at today's Commencement Exercises of Minghsin University of Science and Technology (MUST), Taiwan, celebrating the graduation of the sixth batch of students under the Dual Degree Program in Mechanical Engineering and Mechatronics.

Among the proud graduates of the Dual Degree Program this school year was Aaron Matthew Santos Dator, who demonstrated outstanding performance in his field. He was the recipient of this school year’s Mechatronics Academic Excellence Award, a testament to MUST's and AdU's commitment to nurturing top achievers.

The AdU-MUST Dual Degree Program began on November 5, 2013, with the first batch of students sent to MUST in September 2016. Since then, a total of 74 AdU students have successfully completed their studies and graduated from MUST under this collaborative program.

Sr. Maruja S. Padre Juan, MSCS, Director for University Relations, represented the AdU President, Fr. Daniel Franklin Pilario, CM, at the ceremony, joined by Engr. Lester Olasiman, Chairman of the ME Department, and Engr. Joan Sta. Ana, Chairman of the ECE Department. Their presence underscored the university’s continued commitment for this successful international partnership.

This ongoing collaboration reflects the strong academic and institutional ties between AdU and MUST, and their shared commitment to excellence in engineering education.

𝑨𝒏𝒐𝒕𝒉𝒆𝒓 𝑰𝒏𝒏𝒐𝒗𝒂𝒕𝒊𝒐𝒏 𝑫𝒐𝒏𝒆!

Through the innovative capabilities of the Additive Manufacturing Center for Industrial Ceramics (AMCeram), this product was brought to life using the state-of-the-art 3D Creality Printer. The precision and versatility of our lab’s technology allowed for the successful completion of a complex thesis project, showcasing the potential of 3D printing.

We invite and encourage other students to take full advantage of this cutting-edge facility, where creativity and research can seamlessly come together. Whether you're looking to prototype, experiment, or finalize your own thesis project, AMCeram offers the tools and expertise to help bring your ideas to reality

Stay connected with us, Klasmeyts! 🦅
Contact us:
📧[email protected]
🔗 For updates and announcements, click here:https://www.facebook.com/share/NSGy4A8uNFBfrXQS/?mibextid=LQQJ4dAdamson

𝗧𝗿𝘆 𝗮𝗻𝗱 𝗲𝘅𝗽𝗲𝗿𝗶𝗲𝗻𝗰𝗲 𝗔𝗠𝗰𝗲𝗿𝗮𝗺 𝗻𝗼𝘄!

Adamson University Mechanical Engineering Department

𝐀𝐌𝐂𝐞𝐫𝐚𝐦: 𝐓𝐡𝐞 𝐇𝐮𝐛 𝐟𝐨𝐫 𝐌𝐞𝐜𝐡𝐚𝐧𝐢𝐜𝐚𝐥 𝐄𝐧𝐠𝐢𝐧𝐞𝐞𝐫𝐢𝐧𝐠 𝐁𝐫𝐞𝐚𝐤𝐭𝐡𝐫𝐨𝐮𝐠𝐡𝐬

AMCeram serves as a dedicated room and facility that empowers Mechanical Engineering students to innovate and successfully accomplish their thesis projects, including advancements like 3D printed clay ceramics

The lab supports ME students in completing their thesis projects,providing access not only to clay 3D printing but also to furnaces, tools, and other essential equipment for advanced ceramic material production.

Stay connected with us, Klasmeyts! 🦅
Contact us:

📧[email protected]
🔗 For updates and announcements, click here:https://www.facebook.com/share/NSGy4A8uNFBfrXQS/?mibextid=LQQJ4dAdamson

𝗩𝗶𝘀𝗶𝘁 𝘂𝘀 𝗼𝗻 𝘁𝗵𝗲 𝟭𝘀𝘁 𝗙𝗹𝗼𝗼𝗿 𝗼𝗳 𝘁𝗵𝗲 𝗢𝗭 𝗕𝘂𝗶𝗹𝗱𝗶𝗻𝗴!

Adamson University Mechanical Engineering Department