Crack civil engineering loksewa

Gk.
Q.नेपालमा सर्वप्रथम आरोहण को लागि खुला गरिएको हिमाल कुन हो...
a. माछापुच्छ्रे
b. धौलागिरी
c. अन्नपूर्ण
d. गौरीशंकर

Q. Light weight aggregates are obtained from.....

a. Sedimentary rocks
b. Metamorphic rocks
c. Igneous rocks
d. Volcanic rocks

engineering terminology

1.Elevator:

The movable part of the tail whose only purpose is to grant longitudinal control for achieving longitudinal stability is known as elevator.

2. Flight time:

The total time from the moment an aircraft first moves under its own power for the purpose of taking off to the moment it comes to rest at the end of the flight is known as flight time.

3. Flight visibility:

The term flight visibility is used to indicate the average range of visibility in forward direction from the cockpit of an aircraft in flight.

4. Fuselage:

It indicates the main body of an aircraft to which wings and other parts are attached.

5. Gate position:

The space allotted to an aircraft parking at a loading apron is known as gate position.

6. Hangar:

The large shed erected at the airport for the purpose of housing, servicing and repairing of aircrafts is known as hangar.

7.Helicopter:

It is a type of an aeroplane in which the machine is equipped with one or more lifting propellers rotating horizontally about an approximately vertical axis.

8. Heliport:

The area for landing and taking off of helicopter is known as heliport.

9.Holding apron:

It is the designated portion placed adjacent to the ends of runways for allowing to check aircraft instruments and engine operation prior to take off and also to wait till clearance for take off is given.

10. Horizontal surface:

The imaginary horizontal surface which is circular in plan and which is located at a level of 45 m above the airport established elevation is known as horizontal surface.

11. Instrument Landing System (ILS):

The aircraft, by this system of landing, is brought to rest upon the ground with the help of radio beam facilities installed on the airport and the manipulation of the control instruments by the operator of the aircraft as directed by the radio beams. The ILS thus provides lateral and vertical guidance to the aircraft during landing and it is also popularly known as blind landing system. During bad weather conditions and poor visibility, the operator can make safe landing of aircraft without seeing the runway with the help of ILS.

12. Instrument runway:

The runway which is adequately equipped with the radio beam facilities and on which landing can be made according to ILS rules is known as an instrument runway.

13. International airport:

It is an airport which handles international air traffic and functions according as a place of entry and departure from the country and necessary facilities for to international aviation rules framed by ICAO. It serves customs, immigration and other procedures are also provided on such an airport.

14. International air service:

The air service which passes or crosses the air space of the territory of more than one country is known as an international air service.

15.Landing area:

The portion of airport, excluding the terminal area, which is used for landing and take off of the aircraft is known as landing area.

engineering

प्राविधिक
GK model set: check your preparation 😇
by a technical person 🙏

Probable question

Q. The expansion in portland cement can be tested by??

a. Fineness test
b. Soundness test
c. Setting time test
d. Normal consistency test

Which of the following causes initial setting of cement??

a. C3S
b. C2S
c. C4AF
d. C3A

GK model set प्राविधिक 5th level
Answer भोलि 9बजे आउँछ
तब सम्म यसै संग related topic पढ्नुहोला

1st mcq of the day

Q. योजनाबद्ध विकासको सुरुवात कुन देशबाट भएको हो??
a. चीन
b. अमेरिका
c. रुस
d. अष्ट्रेलिया

Practice 10 gk mcq with answer
5th civil sub-engineer