LIETUVOS TOLIMOJO ŠAUDYMO FEDERACIJA

LIETUVOS TOLIMOJO ŠAUDYMO FEDERACIJA

Share

LITHUANIAN LONG RANGE SHOOTING FEDERATION

Photos from KAHLES Sport Shooting's post 22/09/2022
21/05/2022
11/05/2022

These are examples of groups fired on our 100-300 yard 'shoot-thru' target. Bullets pass thru the paper at 100 yards and continue on to 300 where you see a bigger version of the same group.

This test and many others were fired on the shoot thru target, looking for something that would result in non-linear dispersion, meaning, smaller moa group at 300 than 100 as claimed by many on the internet.

Long story short, after over 70 trials, we found no evidence of non-linear dispersion. Bullets simply don't fly that way. 1 moa at 100 is 1 moa at 300.

Follow me for more ballistic myth busting⚡⚡⚡

Also, subscribe to The Science of Accuracy Academy https://thescienceofaccuracy.com/ this week and we'll send you a free Applied Ballistics hat! Simply forward your verification email to [email protected] with your shipping address and we'll send it⚡⚡⚡

01/05/2022

Sveiki visi!

Tam, kad pagreitinti šį procesą, siūlau/prašau kiekvieno iš Jūsų paremti specialios įrangos, skirtos Ukrainos kariams, pirkimą.
Įranga bus perduota iš rankų į rankas, daugeliui gerai pažistamo, Augtumo Adeikio ir UAB Getbex komandos.
Paramą galite pervesti į UAB Getbex sąskaitą:
LT027044060008238563
Paskirties langelyje nurodyti - LTSF Ukrainai
Iš anksto dėkingas!

Pagarbiai,
Aleksandras Belskis

Photos from Bryan Litz Ballistics's post 14/04/2022
17/03/2022

🤣🤣🤣

⚠️ After purchasing a new 5-H Atlas Bipod from an Authorized Dealer, a customer called us with concerns about loose screws. Once we learned it had no brand markings, we had our suspicions and asked for an image to verify whether his bipod was an authentic 5-H Atlas Bipod or a counterfeit. Unfortunately, we determined it to be the latter...

💔 Stories like this have become too common, which is why we continue to make an awareness to the public, customers and Authorized Dealers alike. It is also the reason we created the Wright Project.

➡️➡️➡️ There are some 5-H Atlas Bipods available for 25% OFF with our Thanksgiving Blemished Sale ✅ Link in our bio‼️

🧐 Compare a side-by-side image of an authentic 5-H Atlas Bipod and a counterfeit and a few indicators we look for in determining the differences between the two.

1️⃣ & 3️⃣ Leg Bolt & Position Button - compare the overall quality of machining, surface appearance, fit and finish. Authentic Atlas Bipods have heat-treated stainless steel components, which are characterized by the dull finish. Compare this to the shiny, reflective, chrome-like plated surface on a counterfeit's.

2️⃣ Position Plate - ours are machine cut from a solid sheet of stainless steel then heat treated, while the counterfeit’s are stamped out of a sheet of an unknown material then plated with a shiny, reflective chrome-like finish.

4️⃣ Brand Engraving - Authentic 5-H Atlas Bipods are engraved on one side of the base with an arrow and "ATLAS® 5-H" followed by "accu-shot.com/pat" and "PATENTED." Counterfeit's will either have the same words, a variation of those words or none of those words stamped onto the base.

5️⃣ Overall Aluminum Finish - an authentic Atlas Bipod is comprised of 6061-T6 aluminum that is Type 3 hard coat Mil-Spec anodized. This process hardens the surface making it extremely durable and therefore difficult to corrode or scratch, while the counterfeits’s is comprised of an unknown material, appears as a shiny black and easily scratched.

#WeAreSupport #AtlasBipod #5H #Patented #MadeInAmerica #MadeInUSA #Counterfeit #WrightProject #Manufacturing #Designing #Engineering #AuthorizedDealer 03/12/2021

https://www.instagram.com/p/CW_91bfLzfG/?utm_medium=share_sheet

⚠️ After purchasing a new 5-H Atlas Bipod from an Authorized Dealer, a customer called us with concerns about loose screws. Once we learned it had no brand markings, we had our suspicions and asked for an image to verify whether his bipod was an authentic 5-H Atlas Bipod or a counterfeit. Unfortunately, we determined it to be the latter... 💔 Stories like this have become too common, which is why we continue to make an awareness to the public, customers and Authorized Dealers alike. It is also the reason we created the Wright Project. ➡️➡️➡️ There are some 5-H Atlas Bipods available for 25% OFF with our Thanksgiving Blemished Sale ✅ Link in our bio‼️ 🧐 Compare a side-by-side image of an authentic 5-H Atlas Bipod and a counterfeit and a few indicators we look for in determining the differences between the two. 1️⃣ & 3️⃣ Leg Bolt & Position Button - compare the overall quality of machining, surface appearance, fit and finish. Authentic Atlas Bipods have heat-treated stainless steel components, which are characterized by the dull finish. Compare this to the shiny, reflective, chrome-like plated surface on a counterfeit's. 2️⃣ Position Plate - ours are machine cut from a solid sheet of stainless steel then heat treated, while the counterfeit’s are stamped out of a sheet of an unknown material then plated with a shiny, reflective chrome-like finish. 4️⃣ Brand Engraving - Authentic 5-H Atlas Bipods are engraved on one side of the base with an arrow and "ATLAS® 5-H" followed by "accu-shot.com/pat" and "PATENTED." Counterfeit's will either have the same words, a variation of those words or none of those words stamped onto the base. 5️⃣ Overall Aluminum Finish - an authentic Atlas Bipod is comprised of 6061-T6 aluminum that is Type 3 hard coat Mil-Spec anodized. This process hardens the surface making it extremely durable and therefore difficult to corrode or scratch, while the counterfeits’s is comprised of an unknown material, appears as a shiny black and easily scratched. #WeAreSupport #AtlasBipod #5H #Patented #MadeInAmerica #MadeInUSA #Counterfeit #WrightProject #Manufacturing #Designing #Engineering #AuthorizedDealer

Want your school to be the top-listed School/college in Vilnius?

Click here to claim your Sponsored Listing.

Location

Telephone

Address


Savanorių Prospektas 1
Vilnius
03116

Opening Hours

Monday 09:00 - 17:00
Tuesday 09:00 - 17:00
Wednesday 09:00 - 17:00
Thursday 09:00 - 17:00
Friday 09:00 - 17:00