Engineer's Knowledge 4 U

19/10/2021

04/09/2019

Make an invorter using transformer,relay and laptop battery
Here relay convert direct current (dc) to alternating current (ac)
And transformer convert low voltage to high voltage

For more click on the link

How to make Inverter with relay and laptop battery, How to make inverter, How to make Very simple inverter

25/08/2019

E- vehicle

05/08/2019

Here is interesting project mostly for engineers

This also help in controlling pollution because of runs on battery

First take Electrical vehicle ( runs on battery) like this type.

Some copper coil of large turn fix at the lower part of vehicle
And
You have to make track road on which at the level of the road powerful magnet is fix, so that when the vehicle moves on this road the magnetic flux change on the coil that's why current (ac) produce on tha the coil. here use rectifier and change into dc (used for charging the battery).

However you speed up the vehicle the battery is charge more.

02/08/2019

Why transformer vibrate to make noise?

Firstly we know that current carring wire (or any conductor) make magnetic field around it.

Transformer, alternating current (AC) is supplied. And AC is sinusoidal so the magnetic field formed is also vary from zero to maximum or maximum to zero or there is core that provide path the magnetic field to flow. Here the coil is magnetised or demagnetized due to this core also magnetised or demagnetized. Due to magnetisation or demagnetized of core, core expand or constract that's why transformer vibrate or make sound.

Note- for this in video go through link

Why transformer vibrate or produce sound, Why do transformer make noise, Why transformer make noise when current flow

24/07/2019

Why the bulb is filled with inert gas?

Inert gas (argon or nitrogen) is filled, this is why because of inert gas slow down the evaporation of tungsten filament compared to operating in vaccum

&

Inert gas also give the path way to comes out heat from the bulb.

18/07/2019

Why the bulb is fully packed?

If air enters the bulb, get fused because of oxygen, filament Will be damage (burnt) at any point that is countinuity is open.

We know that nothing will burn without oxygen. So here oxygen is prohibited.