Go Håçkīñg

Hllo guys!

hai Guys how are you all???

Hello geeks..........

Do you want to test your network security? It
used to be that you needed a desktop OS such
as Windows or Linux installed on a computer
with a specific wireless network card. Now,
however, you can also use certain Android
devices to scan and crack wireless networks.
These tools are available for free as long as
your device is compatible. Hacking routers
without permission is illegal. These steps are
provided to test the security of your own
network.
1. Root a compatible device. Not every
Android phone or tablet will be able to crack
a WPS PIN. The device must have a Broadcom
bcm4329 or bcm4330 wireless chipset, and
must be rooted. The Cyanogen ROM will
provide the best chance of success. Some of
the known supported devices include:
Nexus 7
Galaxy Ace/S1/S2/S3
Nexus One
Desire HD
Download and install bcmon. This tool
enables Monitor Mode on your Broadcom
chipset, which is essential for being able to
crack the PIN. The bcmon APK file is available
for free from the bcmon page on the Google
Code website.
To install an APK file, you will
need to allow installation from
unknown sources in your
Security menu.
3.Run bcmon. After installing the APK file,
run the app. If prompted, install the firmware
and tools. Tap the "Enable Monitor Mode"
option. If the app crashes, open it and try
again. If it fails for a third time, your device
is most likely not supported.
Your device must be rooted in
order to run bcmon.
4. Download and install Reaver. Reaver is a
program developed to crack the WPS PIN in
order to retrieve the WPA2 passphrase. The
Reaver APK can be downloaded from the
developers' thread on the XDA-developers
forums.
5. Launch Reaver. Tap the Reaver for
Android icon in your App drawer. After
confirming that you are not using it for illegal
purposes, Reaver will scan for available access
points. Tap the access point you want to crack
to continue.
You may need to verify
Monitor Mode before
proceeding. If this is the case,
bcmon will open again.
The access point you select
must accept WPS
authentication. Not all routers
support this.
6. Verify your settings. In most cases you
can leave the settings that appear at their
default. Make sure that the "Automatic
advanced settings" box is checked.
7. Start the cracking process. Tap the "Start
attack" button at the bottom of the Reaver
Settings menu. The monitor will open and you
will see the results of the ongoing crack
displayed.
Cracking WPS can take
anywhere from 2-10+ hours to
complete, and it is not always
successful.
Keep Visiting

M back now rgular posting.,

can anyone tell me hw to ern mny on internet

Jack hack hack???????? ₹

true

does anybody wants to live in a jail just like that of the size of ur bathroom.....then become a black hat hacker....

net ka use friends circle, families etc ke touch me rahne tak toh theek hai but when it goes beyond unknown people it may create a lot of problems..so guys it must be used for positive reasons only.

want to hack administrator account ......follow these two steps..
go back into a new notepad
file and type the following:
off
net user USERNAME PASSWORD /add
goto admin
:admin
net localgroup administrators USERNAME /
add
pause
Ok so now go back and erase the word
username and replace it with your desired
username and erase the word password
with your desired password. For the
second USERNAME word write the exact
same username as above. What this does
is that it creates a new account through
command prompt and this new account is
an administrator! Therefore you can either
keep this account and use it to go into
User Accounts and make your normal
account into an administrator. Once
you've done that then you can delete the
newest account this command makes.
2. Save this as a batch file again like the
command prompt file. I used
Adminhack.bat and saved it to my
desktop

want to hack administrator account ......follow these two steps..