mind_my_creativity

Hi.

I know its been a while since I last posted, but I have been busy finalising the last stages of the food court for the tennis stadium I will be selling on CGTrader.

This stadium is coming along nicely, but I will be taking a break from it for a little while to focus on smaller scale projects, mostly taking the assets from this project and Steamboat Willie (From last year) and getting them ready also to sell.

I have done about 98% of the food court and soon I will start work on the ground floor which will mostly contain locker rooms, bathrooms and small eating areas.

All are set at Day (22nd July in Sydney Australia) and Night

Thanks again and I hope you like what you see.

Thanks.












.4

Thanks again and happy 2025. My first project for the year is an updated (and fan made) version of the original Wii sports stadium for tennis released nearly 20 years ago in the mid 2000s. For this, I have decided to make this tennis stadium into one that is realistic and modern in look and appearance. For this I did a little bit of research and have come up with a few design changes from the original. These would include:

* Realistic and more seating as the original had none.

* Updated the roof to be more rounder and have a more open air back. Inspired by Optus stadium in Perth WA (Australia) and the curve of a tennis ball

* Stadium lighting for nights

* A new level for food and relaxation (Coming Soon)

* Entry stairs to the side and connected to the food court area (inspired by Blacktown [Sydney, Australia] Baseball Field).

* Ground floor (coming soon) to be Locker Rooms, Toilets/Showers and an eating area, with one side for the players and the other side for Umpires, Ball Kids etc. This idea could change as I start working on this idea soon.

* Temp seating near the court (Coming soon), reflecting the standing spectators seen in the game

* Umpire and Player Seating (Coming soon) inspired by those seen at The Australian Open.

Once finished, I will be sharing/selling this project with others on CG Trader. (Price undecided yet)

Thanks again and looking forward to some feedback

2025

Hi Everyone.

Just before Christmas, I have created a High Tech Santa Sleigh in Blender, to be sold for $30 on CG Trader. If you are keen to have a look, click on the link below.

Note:

Included within these files are

Two blender models with each having separate texture types (1 Procedural and 1 baked)
Different file types so it can be used in other 3D software packages. These include:

FBX
OBJ
GLB (Augmented Reality)
STL

Happy Christmas. Thanks again for your support.

CG Trader Link
https://www.cgtrader.com/mindcreativity1

Video Link
https://youtu.be/gpKXdFYnJ3w















2024

Santa High Tech Sleigh Video Presentation CG Trader What is the product I am sellingThe Product I am selling is Santa's Sleigh, but with a little bit more high tech attached. This includes a GPS, Music Player,...

Hello Everyone

It may have taken a little longer than planned, but I can be proud to announce my latest 3D Model I will be selling on CGTrader, a traditional Ceramic Piggy Bank.

This piggy bank was made in Blender 4.1, and of traditional size. It can be used on its own and be placed as a prop in a kids room, or could even be used in conjunction with the coins I previously uploaded last month.

Included within these files are

Two blender models with each having separate texture types (1 Procedural and 1 baked)
Different file types so it can be used in other 3D software packages. These include:

FBX
OBJ
GLB (Augmented Reality)
STL

You will be able to find these model within the link provided below:
https://www.cgtrader.com/mindcreativity1

Thanks again for your support.

,

,
,
,

Hello.

As part of my latest uploads, I am proud to be selling my latest 3D project, World Coins (Release 1). All coins are as updated as possible (Queen Elizebeth II and King Charles III are included on the nations of the commonwealth), however some of the US Coins may include some older versions (I can include newer versions on request). For this release coins are from

US,
UK
Euro (Common Side Only)
Canada and
Australia

These coins can be used for a wide range of projects, large or small, final/economic or not or be used for children's toys.

Please note: National Coins only. No paper/plastic money are included.

Included within these files are

Two blender models with each having separate texture types (1 Procedural and 1 baked)
Different file types so it can be used in other 3D software packages. These include:

FBX
OBJ
GLB (Augmented Reality)
STL

You will be able to find these model within the link provided below:
https://www.cgtrader.com/mindcreativity1

Thanks again for your support.

,
,
,
,
,

These drink bottles are a continuation of the past post, but instead of separate files for all 8 colours, here all 8 colours are grouped together as one whole collection. Each bottle is modeled and textured using procedural nodes (settings that can be modified to your desire), in Blender 4.1, but a separate file does use baked materials, materials that are flat and can’t be changed. These are specifically designed to be used in other 3D programs in conjunction with other file types (see below).

All 8 steel bottles are separated into three separate pieces, the main bottle itself, the lid and a plastic protector, located at the bottom of the lid, unseen when the lid is on, but can be seen when it's off. The Lid is parented to the bottle and the protector is parented to the lid, so any movement of the bottle can be easily achieved.

There are 8 colours in all you can buy with each sold separately. These colours are:

Blue
Red
Green
Pink
Yellow
Brown
Grey/Gray
Orange

Within these separate colours includes a number of important files to make the process easier. They include:

Two blender models with each having separate texture types (1 Procedural and 1 baked)
Different file types so it can be used in other 3D software packages. These include:

FBX
OBJ
GLB (Augmented Reality)
STL

This whole file is on sale for $35 for the entire 8 colour collection.

You will be able to find these model within the link provided below:
https://www.cgtrader.com/mindcreativity1

After working on the Steamboat Willie boat since February 2024 (I will return to this soon as I need to have a creative break from it), I returned to this project I started earlier in the year, a simple steel drink bottle based on a real life product, which was extremely helpful especially with measurements and materials.

This drink bottle product is modeled and textured using procedural nodes (settings that can be modified to your desire), in Blender 4.1, but a separate file does use baked materials, materials that are flat and can’t be changed. These are specifically designed to be used in other 3D programs in conjunction with other file types (see below).

This bottle is a simple cylinder with a tube like head and is separated into three separate pieces, the main bottle itself, the lid and a plastic protector, located at the bottom of the lid, unseen when the lid is on, but can be seen when it's off. The Lid is parented to the bottle and the protector is parented to the lid, so any movement of the bottle can be easily achieved.

There are 8 colours in all you can buy with each sold separately. These colours are:

Blue
Red
Green
Pink
Yellow
Brown
Grey/Gray
Orange

Within these separate colours includes a number of important files to make the process easier. They include:

Two blender models with each having separate texture types (1 Procedural and 1 baked)
Different file types so it can be used in other 3D software packages. These include:

FBX
OBJ
GLB (Augmented Reality)
STL

I have also created a separate downloadable file where all 8 colours are included in one collection. These colours are the same as the 8 separate ones with the same material and file formats.

Each separate colour bottle is sold for $8 each or $35 for the entire 8 colour collection.

You will be able to find these model within the link provided below:
https://www.cgtrader.com/mindcreativity1

Hi. This project was completed in Blender 4.1 using Cycles.

Its been a while since I last posted. Since mid February, I have been working on one of my biggest projects, which when completed, I will be selling this complete model in the next few months upon completion).

So far it is a work in progress, but 98% of the modeling is complete with smaller objects still to be modeled, like a few more books,window handles and a sandwich in the lunchroom, to name a few.

As you can see, I have modeled Mickey's steamboat W***y as it is now in the public domain in some parts of the world. I tried to get it as close as possible as seen in the cartoon, but because getting the boat accurately in every shot was not their main concern, I did what I could to get as realistic as possible while putting in my own spin to the overlook (such as the skylight).

Also the inside layout is my own interpretation, with the main room being the kitchen with entry from the back. Other rooms include a Toilet, a lunch room and a potato room as seen at the end of the cartoon.

I have also modeled all of the assets seen here (including, but not limited to), (including, but not limited to),

Kitchen Electronics
Microwave
Kettle
Toaster
Portable Cooktop
Pots/Pans
Kitchen Utensils
Containers
Salt and Pepper shakers
Potatoes
Plates/Cups
Boxes
Binoculars
Shelving
Toilet
Taps
Communication devices

I will be considering sharing these assets also over the course of this year with the blender community.

I will be back once the materials have been placed in

Thanks

#

Hello everyone and Hello Whovians.

As I write this in late 2023, the 60th Anniversary finished about two weeks ago, it is only days away, and as part of the celebrations, I created in 3D (using Blender) The 3rd Doctor's trusted Sonic Screwdriver. This is the second incarnation of the Sonic Screwdriver, but really could be seen as the birth of the sonic screwdriver which has gotten more detailed over the decades.

Inside, The TARDIS is bigger on the inside than on the outside, and can change often. (Note: I have created two versions of this, and will likely be uploaded sometime early in the new year).

If you are interested in buying this, it will cost between $15 and can be found on my page https://www.cgtrader.com/mindcreativity1

https://youtu.be/RveCkiFa53Y

1970s Sonic Screwdriver (Version 01) (Doctor Who 60TH Anniversary Celebration Hello everyone and Hello Whovians.As I write this in late 2023, the 60th Anniversary finished about two weeks ago, it is only days away, and as part of the c...

Hello everyone and Hello Whovians.

As I write this in late 2023, the 60th Anniversary is only days away, and as part of the celebrations, I created in 3D (using Blender) The Doctor's time and pace machine known as The TARDIS. The TARDIS stands for Time And Relative Dimensions In Space.

The exterior of the TARDIS, is an old Police Telephone Box from the 1960s. The reason for this was because these types of Police Boxes were quite common and wanted something familiar as the time machine. Part of the plan was The TARDIS was going to change according to where it lands, so it can blend in, but the show's incredibly small budget and time constraints meant the design stuck and this was written in the shows ‘Chameleon circuit’.

Inside, The TARDIS is bigger on the inside than on the outside, and can change often. (Note: I have created two versions of this, and will likely be uploaded sometime early in the new year).

If you are interested in buying this, it will cost between $30 and can be found on my page https://www.cgtrader.com/mindcreativity1

Thanks again for your support.

https://youtu.be/SIvxd8NsgCM

The Daleks (DOCTOR WHO 60TH ANNIVERSARY CELEBRATION): Skaro Corrdior Animation [CG Trader] Hello everyone and Hello Whovians.As I write this in late 2023, the 60th Anniversary is only days away, and as part of the celebrations, I created in 3D (usi...