Automation Technology College Ltd.

28/08/2026

See details below for the Mechanical Engineering Diploma at ATC. Classes start in October. Call 758-3760 or 788-0403 for registration details.

NAME OF PROGRAMME: Level 2 Diploma in Engineering IVQ – Maintenance Technology (2850-52)
(*Special Offer: Free Pumps and Valves Course)

CERTIFICATION: City and Guilds of London

PROGRAMME DURATION: October 2026 to October 2027

MODE: Blended (Tuition is online. Practicals and exams are held at ATC Curepe (4 Broome Street))

ENTRY REQUIREMENTS:
To qualify for entry into this programme, students should have a secondary school education.

AGE: 17+

SCHEDULE:
1)Mondays and Wednesdays, 5:00pm to 8:00pm
Start Date: 12-Oct-26
OR
2)Saturdays, 8:30am to 2:30pm
Start Date: 17-Oct-26

PAYMENT PLAN AND COURSE FEES: Pay $1800 at registration and then receive an 11-month payment plan of $1395/month for the balance. (Total is $17,145)
The first installment of the payment plan is due 28th October 2026.
Registration fees are refundable only if ATC cancels the programme schedule or postpones the programme’s start date.
PLEASE NOTE - Students will be required to bring a tool kit of basic tools to the practicals and practical assessments. The tool kit listing is pending.

RECOMMENDED TEXTBOOK
Certificate Mathematics (4th Edition) by A. Greer & C. E. Layne

REGISTRATION REQUIREMENTS: Registration fee and a valid ID. No registrations are performed, and no payments are accepted at the offices.
Registrations are done online and payments are made through online banking or bank deposits only. Contact us for more details.

REGISTRATION PROCESS:
The process is simple. WhatsApp together the following to 788-0403 or 758-3760:
1. Evidence of successful payment of registration fee (eg pic of your deposit slip/screen)
2. Pic of your ID/DP card
3. Email address

CONTACT INFORMATION:
Our offices are currently open on Saturdays between 8:30am and noon. However, no registrations are performed, and no payments are accepted at the offices.
Registrations are done online and payments are made through online banking or bank deposits only. Please call the contact numbers below for details.
Contact Nos: 788-0403 or 758-3760
Email: [email protected]
ATC Curepe: 4 Broome Street, Curepe
ATC San Fernando: 127B Coffee Street, San Fernando

Disclaimer: Cost and Schedules are subject to change.

*IMPORTANT
* Only students who have completed their payments to ATC will be eligible for the Free Pumps and Valves Course Special Offer

25/08/2026

Start your career with the right foundation with quality vocational and technical training. Register at ATC. Classes start in October 2026

NAME OF PROGRAMME: Electrical Installation Training Programme
(*Special Offer: Free Pumps and Valves Course)

CERTIFICATION
On successful completion of this programme, students will receive certification from the City & Guilds of London Institute and Automation Technology College and be eligible to apply for the Wireman’s Licence at the Electrical Inspectorate which certifies electricians in Trinidad and Tobago.
Certification comprises:
1) City & Guilds of London Certification: Level 2 Diploma in Engineering IVQ – Electrical and Electronics Technology (2850-54)
2) ATC Certification: Wireman/Electrician Supplementary Training

TARGET AUDIENCE
This programme is for:
1) persons who want to become electricians/wiremen and who have little or no experience in electrical wiring
2) persons who would like to apply for the Wireman’s Licence
3) persons who want multiple career options; i.e. options to pursue a career as a wireman/electrician and/or an electrical engineering technician
4) persons who would like to have an internationally recognized qualification

PROGRAMME DURATION: October 2026 to October 2027

MODE: Blended (Tuition is online. Practicals and exams are held at the College)

ENTRY REQUIREMENTS:
To qualify for entry into this programme, students should have a secondary school education.

AGE: 17+

SCHEDULE:
1)Tuesdays and Thursdays, 5:00pm to 8:00pm
Start Date: 13-Oct-26
Practicals will be held at ATC San Fernando (127B Coffee Street)
OR
2)Sundays, 9:00am to 3:00pm
Start Date: 18-Oct-26
Practicals will be held at ATC Curepe (4 Broome Street)

PAYMENT PLAN AND COURSE FEES: Pay $1800 at registration and then receive an 11-month payment plan of $1420/month for the balance. (Total is $17,420)
The first installment of the payment plan is due 28th October 2026.
DISCLAIMER -
1) Registration fees are refundable only if ATC cancels the programme schedule or postpones the programme’s start date.
2) Programme fees are subject to change if the foreign exchange bank sell rate exceeds 6.8TTD for 1USD

PLEASE NOTE - Students will be required to bring a tool kit of basic tools to the practicals and practical assessments. The tool kit listing is pending.

RECOMMENDED TEXTBOOK (Available at most book stores)
Certificate Mathematics (4th Edition) by A. Greer & C. E. Layne

REGISTRATION REQUIREMENTS: Registration fee and a valid ID. No registrations are performed, and no payments are accepted at the offices.
Registrations are done online and payments are made through online banking or bank deposits only. Contact us for more details.

REGISTRATION PROCESS:
The process is simple. WhatsApp together the following to 788-0403 or 758-3760:
1. Evidence of successful payment of registration fee (eg pic of your deposit slip/screen)
2. Pic of your ID/DP card
3. Email address

CONTACT INFORMATION:
Our offices are currently open on Saturdays between 8:30am and noon. However, no registrations are performed, and no payments are accepted at the offices.
Registrations are done online and payments are made through online banking or bank deposits only. Please call the contact numbers below for details.
Contact Nos: 788-0403 or 758-3760
Email: [email protected]
ATC Curepe: 4 Broome Street, Curepe
ATC San Fernando: 127B Coffee Street, San Fernando

Disclaimer: Cost and Schedules are subject to change.

25/08/2026

Futureproof your career with quality vocational and technical training. Register at ATC. Classes start in October 2026. See details below.

NAME OF PROGRAMME: Electrical Installation Training Programme
(*Special Offer: Free Pumps and Valves Course)

CERTIFICATION
On successful completion of this programme, students will receive certification from the City & Guilds of London Institute and Automation Technology College and be eligible to apply for the Wireman’s Licence at the Electrical Inspectorate which certifies electricians in Trinidad and Tobago.
Certification comprises:
1) City & Guilds of London Certification: Level 2 Diploma in Engineering IVQ – Electrical and Electronics Technology (2850-54)
2) ATC Certification: Wireman/Electrician Supplementary Training

TARGET AUDIENCE
This programme is for:
1) persons who want to become electricians/wiremen and who have little or no experience in electrical wiring
2) persons who would like to apply for the Wireman’s Licence
3) persons who want multiple career options; i.e. options to pursue a career as a wireman/electrician and/or an electrical engineering technician
4) persons who would like to have an internationally recognized qualification

PROGRAMME DURATION: October 2026 to October 2027

MODE: Blended (Tuition is online. Practicals and exams are held at the College)

ENTRY REQUIREMENTS:
To qualify for entry into this programme, students should have a secondary school education.

AGE: 17+

SCHEDULE:
1)Tuesdays and Thursdays, 5:00pm to 8:00pm
Start Date: 13-Oct-26
Practicals will be held at ATC San Fernando (127B Coffee Street)
OR
2)Sundays, 9:00am to 3:00pm
Start Date: 18-Oct-26
Practicals will be held at ATC Curepe (4 Broome Street)

PAYMENT PLAN AND COURSE FEES: Pay $1800 at registration and then receive an 11-month payment plan of $1420/month for the balance. (Total is $17,420)
The first installment of the payment plan is due 28th October 2026.
DISCLAIMER -
1) Registration fees are refundable only if ATC cancels the programme schedule or postpones the programme’s start date.
2) Programme fees are subject to change if the foreign exchange bank sell rate exceeds 6.8TTD for 1USD

PLEASE NOTE - Students will be required to bring a tool kit of basic tools to the practicals and practical assessments. The tool kit listing is pending.

RECOMMENDED TEXTBOOK (Available at most book stores)
Certificate Mathematics (4th Edition) by A. Greer & C. E. Layne

REGISTRATION REQUIREMENTS: Registration fee and a valid ID. No registrations are performed, and no payments are accepted at the offices.
Registrations are done online and payments are made through online banking or bank deposits only. Contact us for more details.

REGISTRATION PROCESS:
The process is simple. WhatsApp together the following to 788-0403 or 758-3760:
1. Evidence of successful payment of registration fee (eg pic of your deposit slip/screen)
2. Pic of your ID/DP card
3. Email address

CONTACT INFORMATION:
Our offices are currently open on Saturdays between 8:30am and noon. However, no registrations are performed, and no payments are accepted at the offices.
Registrations are done online and payments are made through online banking or bank deposits only. Please call the contact numbers below for details.
Contact Nos: 788-0403 or 758-3760
Email: [email protected]
ATC Curepe: 4 Broome Street, Curepe
ATC San Fernando: 127B Coffee Street, San Fernando

Disclaimer: Cost and Schedules are subject to change.

18/08/2026

The global standard for safety excellence. Get NEBOSH certified. Classes start in September. Register now!!. Call 788-0403 or 758-3760 for details. The programme information is below. Attend our zoom information session on Wednesday, 2nd September 2026, 6:30pm, to learn more. To book your spot, whatsapp 758-3760

PROGRAMME NAME: NEBOSH International General Certificate in Occupational Health and Safety
( * Special Offer: Free First Aid Training and Certification )

PERIOD: September 2026 to January 2027

MODE: Blended
(There is a mix of online and in-person classes at the Curepe Branch)

DURATION: 65 hours

PAYMENT PLAN AND COURSE FEES: Pay $1985 at registration and then receive a 3 month payment plan ($2170 by 28th September 2026, $2170 by 28th October 2026 and $2170 by 28th November 2026) for the balance. (Total is $8495). The e-textbook is included in the cost.
DISCLAIMER -
1) Registration fees are refundable only if ATC cancels the programme schedule or postpones the programme’s start date.
2) Programme fees are subject to change if the foreign exchange bank sell rate exceeds 6.8TTD for 1USD

REGISTRATION REQUIREMENTS: Registration fee and valid id. No registrations are performed and no payments are accepted at the offices.
Registrations are done online and payments are made through online banking or bank deposits only. Contact us for more details.

REGISTRATION PROCESS:
The process is simple. WhatsApp together the following to 788-0403 or 758-3760:
1. Evidence of successful payment of registration fee (eg pic of your deposit slip/screen)
2. Pic of your ID/DP card
3. Email address

DAYS/TIMES:
Tues. & Thurs., (5:30 p.m. – 7:30 p.m.)
Start Date: Tuesday 8th September 2026
End Date: Tuesday 19th January 2027
Exam: February 2027
No Classes on 24th September 2026 and 22nd December 2026 to 31st December 2026

CONTACT INFORMATION:
Our offices are currently open on Saturdays between 8:30am and noon. However no registrations are performed and no payments are accepted at the offices.
Registrations are done online and payments are made through online banking or bank deposits only. Please call the contact numbers below for details.
Contact Nos: 788-0403 or 758-3760
Email: [email protected]

For more information about the programme:
https://atc-tt.com/index.php/programmes/health-and-safety/international-general-certificate-in-occupational-health-and-safety/

Disclaimer: Cost and Schedules are subject to change.

IMPORTANT
* Only students who have completed their payments to ATC will be eligible for the Free First Aid Training and Certification Special Offer

28/07/2026

NAME OF COURSE: Preparation for Wireman’s Licence Exam

MODE: Online

PRE-REQUISITE: Diploma in Electrical Installation or equivalent.

OBJECTIVES:
1) Review the knowledge required to install, maintain and repair residential and commercial electrical systems.
2) Understand wiring diagrams for proper planning and layout of electrical wiring, fixtures, panels and raceways.
3) Be able to recognize and put into practice the various statutory requirements as outlined in the T&T Electrical Wiring Code Part 1 and other regulations.
4) Understand the proper use of tools and safe working practices.
5) Understand how to perform a load detail.

CERTIFICATION: Automation Technology College (ATC)

PAYMENT PLAN AND COURSE FEES: Pay $1295 at registration and $1200 by 28th September 2026.(Total is $2495).
Registration fees are refundable only if ATC cancels the programme schedule or postpones the programme’s start date.

REGISTRATION REQUIREMENTS: Registration fee (non-refundable) and valid id. Registration and payments are online.

Pay through online banking or make a bank deposit at RBL. Contact us for more details.

SCHEDULE:
Days and Times: Every Other Sunday (8:30am to 12:30pm)
Start Date: 6-Sep-26
End Date: 15-Nov-26

CLASS DATES
Sunday, September 6, 2026
Sunday, September 20, 2026
Sunday, October 4, 2026
Sunday, October 18, 2026
Sunday, November 1, 2026
Sunday, November 15, 2026

REGISTRATION PROCESS:
The process is simple. WhatsApp together the following to 788-0403 or 758-3760:
1. Evidence of successful payment of registration fee (eg pic of your deposit slip/screen)
2. Pic of your ID/DP card
3. Email address

CONTACT INFORMATION:
Our offices are currently open on Saturdays between 8:30am and noon. However no registrations are performed and no payments are accepted at the offices.
Registrations are done online and payments are made through online banking or bank deposits only. Please call the contact numbers below for details.
Contact Nos: 788-0403 or 758-3760
Email: [email protected]

For more information about Automation Technology College:
https://www.atc-tt.com/about

Disclaimer: Cost and Schedules are subject to change

28/07/2026

If you want to understand how instrumentation systems really work, enroll in this online course. It is also a great enhancement course for persons studying or working in the electrical field since E&I technicians are in demand. Contact 758-3760 or 788-0403 for details.

NAME OF COURSE: Instrumentation 1 (I1) – Instrumentation, Measurement and Control in Process Industries
This course is a module from the City & Guilds Level 2 Diploma in Process Technology

MODE: Online (The examination will be done at the College)

CERTIFICATION: City and Guilds

ENTRY REQUIREMENTS
There are no academic entry requirements for this programme.

SCHEDULE:
Tuesdays, 6:30pm to 8:00pm
Start Date: 8-Sep-26
End Date: 12-Jan-27
No classes on 22-Dec-26 and 29-Dec-26

PAYMENT PLAN AND COURSE FEES: Pay $1250 at registration, $1250 by 28th September 2026, $1250 by 28th October 2026, and $1250 by 28th November 2026 (Total is $5000).
DISCLAIMER -
1) Registration fees are refundable only if ATC cancels the programme schedule or postpones the programme’s start date.
2) Programme fees are subject to change if the foreign exchange bank sell rate exceeds 6.8TTD for 1USD

REGISTRATION REQUIREMENTS: Registration fee, email address and valid id. No registrations are performed and no payments are accepted at the offices.
Registrations are done online and payments are made through online banking or bank deposits only. Contact us for more details.

REGISTRATION PROCESS:
The process is simple. WhatsApp together the following to 788-0403 or 758-3760:
1. Evidence of successful payment of registration fee (eg pic of your deposit slip/screen)
2. Pic of your ID/DP card
3. Email address

CONTACT INFORMATION:
Our offices are currently open on Saturdays between 8:30am and noon. However no registrations are performed and no payments are accepted at the offices.
Registrations are done online and payments are made through online banking or bank deposits only. Please call the contact numbers below for details.
Contact Nos: 788-0403 or 758-3760
Email: [email protected]

For more information about Automation Technology College:
https://www.atc-tt.com/about

28/07/2026

Whether you want to boost your home DIY game or open doors to new income streams, our Plumbing Fundamentals 1 Short Course gives you practical, real-world skills in just a few weeks. Register today and take control of your future! Next Class starts in September 2026. Call / WhatsApp 758-3760 or 788-0403 for details

NAME OF COURSE: Plumbing Fundamentals 1

CERTIFICATION
1) City and Guilds of London Skills Foundation Certificate (Basic Plumbing)
2) ATC Plumbing Foundation Skills Supplementary Certificate

AGE: 16+

MODE: In-Person Classes

ENTRY REQUIREMENTS: None

OBJECTIVES (include but are not limited to):
1) Read and Interpret System of Measurements
2) Identify Plumbing Pipes and Fittings
3) Identify and Operate Basic Plumbing Hand and Power Tools
4) Measure, Cut and Solvent Weld PVC Pipes
5) Measure, Cut and Thread GWI Pipes
6) Read and Interpret Basic Isometric Sketches
7) Create Material/Quantity Listing
8) Assemble Polyvinyl Chloride (PVC) and Chlorinated Polyvinyl Chloride (CPVC) Pipes and Fittings
9) Assemble Galvanize Wrought Iron (GWI) Pipes and Fittings
10) Assemble Drain Waste & Vent (DWV) Pipes and Fittings
11) Install Plumbing Fixtures; toilet, shower, sink
12) Perform Basic Fixture Maintenance

SCHEDULE:
Venue: ATC Curepe (4 Broome Street)
Days and Times: Every other Saturday (8:30am to 12:30pm)
Start Date: 12-Sep-26
End Date: 21-Nov-26

CLASS DATES:
Saturday, September 12, 2026
Saturday, September 26, 2026
Saturday, October 10, 2026
Saturday, October 24, 2026
Saturday, November 7, 2026
Saturday, November 21, 2026

PAYMENT PLAN AND COURSE FEES: Pay $1295 at registration, then $1250 by 28th September 2026, and $1250 by 28th October 2026 (Total is $3795)
DISCLAIMER -
1) Registration fees are refundable only if ATC cancels the programme schedule or postpones the programme’s start date.
2) Programme fees are subject to change if the foreign exchange bank sell rate exceeds 6.8TTD for 1USD

PLEASE NOTE - Students will be required to bring the following tools to their practical sessions:
1) Hack-saw set (with Lennox blades) OR 12” Plumbers PVC bar saw
2) 1/8”-2” PVC Pipe cutter
3) 8” Adjustable pliers (slip joint)
4) 12” Adjustable pliers (slip joint)
5) Measuring tape
6) Screwdriver (flat/Phillip)
7) 1’ Plumber level (3 spirits)
8) 8” Spanner (crescent wrench)

REGISTRATION REQUIREMENTS: Email address, registration fee and valid id. No registrations are performed and no payments are accepted at the offices.
Registrations are done online and payments are made through online banking or bank deposits only. Contact us for more details.

REGISTRATION PROCESS:
The process is simple. WhatsApp together the following to 788-0403 or 758-3760:
1. Evidence of successful payment of registration fee (eg pic of your deposit slip/screen)
2. Pic of your ID/DP card
3. Email address

CONTACT INFORMATION:
Our offices are currently open on Saturdays between 8:30am and noon. However no registrations are performed and no payments are accepted at the offices.
Registrations are done online and payments are made through online banking or bank deposits only. Please call the contact numbers below for details.
Contact Nos: 758-3760 or 788-0403
Email: [email protected]
Search on web

20/07/2026

The global standard for safety excellence. Get NEBOSH certified. Classes start in June. Register now!!. Call 788-0403 or 758-3760 for details. Programme information is below.

PROGRAMME NAME: NEBOSH International General Certificate in Occupational Health and Safety
( * Special Offer: Free First Aid Training and Certification )

PERIOD: September 2026 to January 2027

MODE: Blended
(There is a mix of online and in-person classes at the Curepe Branch)

DURATION: 65 hours

PAYMENT PLAN AND COURSE FEES: Pay $1985 at registration and then receive a 3 month payment plan ($2170 by 28th September 2026, $2170 by 28th October 2026 and $2170 by 28th November 2026) for the balance. (Total is $8495). The e-textbook is included in the cost.
DISCLAIMER -
1) Registration fees are refundable only if ATC cancels the programme schedule or postpones the programme’s start date.
2) Programme fees are subject to change if the foreign exchange bank sell rate exceeds 6.8TTD for 1USD

REGISTRATION REQUIREMENTS: Registration fee and valid id. No registrations are performed and no payments are accepted at the offices.
Registrations are done online and payments are made through online banking or bank deposits only. Contact us for more details.

REGISTRATION PROCESS:
The process is simple. WhatsApp together the following to 788-0403 or 758-3760:
1. Evidence of successful payment of registration fee (eg pic of your deposit slip/screen)
2. Pic of your ID/DP card
3. Email address

DAYS/TIMES:
Tues. & Thurs., (5:30 p.m. – 7:30 p.m.)
Start Date: Tuesday 8th September 2026
End Date: Tuesday 19th January 2027
Exam: February 2027
No Classes on 24th September 2026 and 22nd December 2026 to 31st December 2026

CONTACT INFORMATION:
Our offices are currently open on Saturdays between 8:30am and noon. However no registrations are performed and no payments are accepted at the offices.
Registrations are done online and payments are made through online banking or bank deposits only. Please call the contact numbers below for details.
Contact Nos: 788-0403 or 758-3760
Email: [email protected]

For more information about the programme:
https://atc-tt.com/index.php/programmes/health-and-safety/international-general-certificate-in-occupational-health-and-safety/
For more information about Automation Technology College:
https://atc-tt.com/index.php/about-us/history/
Disclaimer: Cost and Schedules are subject to change.

IMPORTANT
* Only students who have completed their payments to ATC will be eligible for the Free First Aid Training and Certification Special Offer

17/07/2026

Plan Ahead. Stay Ahead.
Take a look at our upcoming programmes to find the perfect fit for your goals. Check the dates, prep your schedule, and secure your spot early—classes fill up fast!
1) Choose your programme.
2) Prepare your plan.
3) Register today.

Schedules and prices are available at https://www.atc-tt.com/
Call/Whatsapp: 788-0403 or 758-3760 for more details.

17/07/2026