MeggerAsia

Introducing the IDAX322 insulation diagnostic tester – a high-voltage instrument designed specifically for utilities to perform accurate insulation condition assessments even in the most demanding field conditions.

Don't let insulation failures catch you off guard.

Discover how the IDAX322 can help you take control of your insulation condition assessment process, ensuring a reliable and safe electrical network for your customers.

Learn more here - https://ow.ly/QqVH50SMTJG

Shorlisted Industrial Case Studies Sharing:
Rotor Bar Problem on Motor

A steel manufacturing plant uses a wide range of motors for different parts of the process. As part of the predictive maintenance procedure, on-line monitoring needs to be constantly conducted to protect and prolong the life of the motors. After analysing the measurement data using the Megger Baker EXP4000, it was determined that the rotor bar had signs of fracture...

Click here to read full case study:
https://ow.ly/S7F150QWjaj

Megger Africa and East Asia Sales Conference 2024🔥🔥🔥

Online Dissolved Gas Analysis with Megger InsuLogix® G2

Accurately measuring low levels of acetylene dissolved in insulating fluid (oil) in the presence of ‘interfering gases’ is vital for promptly identifying critical arcing faults in power transformers. Online dissolved gas analysis (DGA) monitors with this ability have historically been too costly to allow large-scale, fleet-wide deployment.

This application note describes a new solution – the Megger InsuLogix® G2 – which provides accurate measurement of acetylene in oil, in addition to measuring hydrogen as an early fault indicator, at a price point that justifies its deployment on medium and large power transformers.

Download application note here:
https://ow.ly/EPaN50QNhxP

Having problems testing high voltage cables?

The HV DAC series of test and diagnostic systems are designed for after-laying testing on newly installed high voltage (HV) cables as part of quality control, and for condition assessment on repaired or service-aged HV cables. There two models available in the series, the 200 kV for testing cables rated up to 132 kV and the 300 kV for testing cables rated up to 230 kV.

Watch demo video:
https://ow.ly/ob2v50QMcLL

Download case study written by a Polish energy sector customer:
https://ow.ly/k8Th50QMcLM

Introducing a new True RMS Industrial Digital Multimeter

The AVO850 is a professional True RMS Industrial Digital Multimeter that has an impressive 50,000 count TFT colour display with graphing capabilities. A commercial grade multimeter that boasts fast AD converting sampling time, high accuracy, built-in data logging and Trend Capture features. It can trace any interrupted problems of the equipment and watch on without a person, thanks to its built-in Bluetooth technology.

The AVO850 True RMS multimeter is designed for electronic, electricians, technicians, engineers, and service personnel. Bluetooth connectivity and app support for Android or iOS devices allow real-time result sharing.*(Coming soon)

Click here to learn more about product features:
https://ow.ly/X6sW50QMcxJ

Shorlisted Industrial Case Studies Sharing:
--> Battery discharge test

Stationary batteries used in a high voltage substation are rated nominal for 125 Volts DC. To obtain 125 Volts DC, the stationary battery uses a total number of battery cells from 58 to 60 cells in series. Each cell has a voltage equal to 2 volts per cell.

In the event of a power failure in a high-voltage substation, there will be no DC power from the battery charger to supply electricity to the substation's control and protection systems. Therefore, a battery capacity test is necessary...

Click here to read full case study:
https://ow.ly/G9yX50QI5H1

New Product Launch - FCC3450 Flexible Clamp Meter

The FCC3450 is a Bluetooth® enabled flexible current clamp, designed to make AC/DC voltage, frequency, continuity and resistance measurements, as well as AC current up to 3000 A. It measures True RMS voltage up to 1000 V AC/DC and comes with built in display with 10 000 count resolution.

FCC3450 is a new Must-Have tool for electricians!

Learn more and download datasheet:
https://forms.gle/mnZPAsV56ZPZdKVm9

Why is Guard Terminal Important in Insulation Testing?

Insulation resistance measurement is one of the most widely used tests for power assets but, to achieve dependable results, it’s universally accepted that it’s essential to use a test set with a guard terminal. In this application note, we look at why this is and examine the frequently neglected issue of guard terminal performance.

Click here to download:
https://forms.gle/jXSLvyauXJ1k7bRG6

Why is Guard Terminal Important in Insulation Testing Please fill in the below details to get the application note. Thank you!

Primeon - Create Your Perfect Package

The PRIMEON test van system redefines the state-of-the-art: It is a complete solution for cable fault location and can also be configured with VLF testing and diagnostics options.

Primeon fits many different types of vehicles with a wide variety of control units.

Watch demo video:
https://ow.ly/YKQ350QtRYX

Download product brochure:
https://ow.ly/aA3750QtRYW

Shorlisted Industrial Case Studies Sharing:
--> 22 kV Capacitor Bank

Applications of capacitor banks in 22 kV power transmission systems are used to adjust the voltage to the desired level. They are used to improve the power factor of the load and reduce the loss in transmission lines. In applications, they consist of a power fuse, a vacuum circuit breaker, and a capacitor bank.

In an inspection for scheduled maintenance using a thermal IR, abnormal heat was found to be emitting from the power fuse base clamp...

Click here to read full case study:
https://forms.gle/SKLRZHH4q8ZwotKr5

Testing wind turbine lightning protection with Megger DLRO

The most significant danger facing wind turbines is damage from lightning strikes. To reduce the likelihood of damage, protection from lightning is now being built into the turbines. The protection takes the form of a low resistance path to ground. The path goes from the blade’s tip to the base of the turbine.

Megger's DLRO low resistance ohmmeter, when used with the KC test leads which are developed specifically for use on wind turbines, becomes the ideal kit for testing wind turbine lightning protection.

Learn more about DLRO:
https://megger.com/dual-power-10-a-micro-ohmmeter-with-ip-rating-dlro10hd

Download the full app note:
https://forms.gle/fJwy4e5CwbYBEvmt7

Testing wind turbine lightning protection with Megger DLRO Please fill in the below details to get the application note. Thank you!