NEXUS Innovation Labs and Intellectual Property Office - De La Salle Lipa

Congratulations to our Lasallian students!

Noa Nicolas Joseph M. Ilagan
Seth Ezekiel N. Villena
Jayjay I. Labong

From learners to certified flyers 🚁✨

Congratulations to all participants for successfully earning your Certificate of Completion in the Drone Summer Training Program!

Your journey to the skies starts here. ☀️📸

🎨🖨️ 𝟮-𝗗𝗮𝘆 𝟯𝗗 𝗗𝗲𝘀𝗶𝗴𝗻 & 𝗣𝗿𝗶𝗻𝘁𝗶𝗻𝗴 𝗦𝘂𝗺𝗺𝗲𝗿 𝗪𝗼𝗿𝗸𝘀𝗵𝗼𝗽 𝗙𝗔𝗤𝘀
Have questions before registering? We’ve got you covered! Here are the answers to our most frequently asked questions. Social media FAQ posts work best when information is concise, easy to scan, and grouped into short sections for readability.

📍 𝗪𝗛𝗢 𝗖𝗔𝗡 𝗝𝗢𝗜𝗡?
✅ Open to 𝗮𝗹𝗹 𝗮𝗴𝗲𝘀, especially 𝟵–𝟭𝟴 𝘆𝗲𝗮𝗿𝘀 𝗼𝗹𝗱
✅ Perfect for 𝗯𝗲𝗴𝗶𝗻𝗻𝗲𝗿𝘀 𝗮𝗻𝗱 𝗮𝗱𝘃𝗮𝗻𝗰𝗲𝗱 𝗹𝗲𝗮𝗿𝗻𝗲𝗿𝘀
✅ No prior 3D design experience needed!

💻 𝗗𝗢 𝗣𝗔𝗥𝗧𝗜𝗖𝗜𝗣𝗔𝗡𝗧𝗦 𝗡𝗘𝗘𝗗 𝗧𝗢 𝗕𝗥𝗜𝗡𝗚 𝗔 𝗟𝗔𝗣𝗧𝗢𝗣?
Yes! Participants are required to bring their 𝗼𝘄𝗻 𝗹𝗮𝗽𝘁𝗼𝗽/𝗱𝗲𝘃𝗶𝗰𝗲.

🛠️ 𝗪𝗛𝗔𝗧 𝗦𝗢𝗙𝗧𝗪𝗔𝗥𝗘 𝗦𝗛𝗢𝗨𝗟𝗗 𝗕𝗘 𝗜𝗡𝗦𝗧𝗔𝗟𝗟𝗘𝗗?

For beginners:
✔️ Create a 𝗧𝗶𝗻𝗸𝗲𝗿𝗖𝗔𝗗 𝗮𝗰𝗰𝗼𝘂𝗻𝘁 beforehand
✔️ Install 𝗖𝘂𝗿𝗮 software

Advanced learners will use:
✔️ 𝗔𝘂𝘁𝗼𝗖𝗔𝗗
✔️ 𝗖𝗿𝗲𝗮𝗹𝗶𝘁𝘆 𝗣𝗿𝗶𝗻𝘁

🎓 𝗔𝗥𝗘 𝗧𝗛𝗘 𝗦𝗢𝗙𝗧𝗪𝗔𝗥𝗘/𝗔𝗣𝗣𝗦 𝗙𝗥𝗘𝗘?
Yes! All software used in the workshop are freeware except AutoCAD. We will use trial version for AutoCAD software. Participants can continue using them even after the workshop and until 30-day trial expires.

🙋 𝗪𝗜𝗟𝗟 𝗧𝗛𝗘𝗥𝗘 𝗕𝗘 𝗜𝗡𝗦𝗧𝗔𝗟𝗟𝗔𝗧𝗜𝗢𝗡 𝗔𝗦𝗦𝗜𝗦𝗧𝗔𝗡𝗖𝗘?
Yes! Since the workshop is highly hands-on, facilitators will assist participants if needed.

🏫 𝗛𝗢𝗪 𝗜𝗦 𝗧𝗛𝗘 𝗖𝗟𝗔𝗦𝗦 𝗖𝗢𝗡𝗗𝗨𝗖𝗧𝗘𝗗?
We will have 𝘁𝘄𝗼 𝘀𝗲𝗽𝗮𝗿𝗮𝘁𝗲 𝗰𝗹𝗮𝘀𝘀𝗿𝗼𝗼𝗺𝘀:
🔹 𝗕𝗲𝗴𝗶𝗻𝗻𝗲𝗿𝘀 𝗖𝗹𝗮𝘀𝘀 – TinkerCAD + Cura
🔹 𝗔𝗱𝘃𝗮𝗻𝗰𝗲𝗱 𝗖𝗹𝗮𝘀𝘀 – AutoCAD + Creality Print

👩‍🏫 𝗜𝗦 𝗜𝗧 𝗟𝗘𝗖𝗧𝗨𝗥𝗘-𝗦𝗧𝗬𝗟𝗘 𝗢𝗥 𝗛𝗔𝗡𝗗𝗦-𝗢𝗡?
Mostly 𝗵𝗮𝗻𝗱𝘀-𝗼𝗻 𝗴𝘂𝗶𝗱𝗲𝗱 𝗹𝗲𝗮𝗿𝗻𝗶𝗻𝗴, especially for beginners!

🤝 𝗜𝗦 𝗧𝗛𝗘𝗥𝗘 𝗢𝗡𝗘-𝗢𝗡-𝗢𝗡𝗘 𝗚𝗨𝗜𝗗𝗔𝗡𝗖𝗘?
Yes! We provide 𝗼𝗻𝗲-𝗼𝗻-𝗼𝗻𝗲 𝗴𝘂𝗶𝗱𝗮𝗻𝗰𝗲, particularly for beginners.

👨‍🏫 𝗛𝗢𝗪 𝗠𝗔𝗡𝗬 𝗦𝗧𝗨𝗗𝗘𝗡𝗧𝗦 𝗣𝗘𝗥 𝗜𝗡𝗦𝗧𝗥𝗨𝗖𝗧𝗢𝗥?
For beginners, we maintain a 𝟭:𝟯 𝗶𝗻𝘀𝘁𝗿𝘂𝗰𝘁𝗼𝗿-𝘁𝗼-𝘀𝘁𝘂𝗱𝗲𝗻𝘁 𝗿𝗮𝘁𝗶𝗼.

🖨️ 𝗪𝗜𝗟𝗟 𝗣𝗔𝗥𝗧𝗜𝗖𝗜𝗣𝗔𝗡𝗧𝗦 𝗣𝗥𝗜𝗡𝗧 𝗧𝗛𝗘𝗜𝗥 𝗢𝗪𝗡 𝗗𝗘𝗦𝗜𝗚𝗡?
Absolutely! Every participant will be able to 𝗽𝗿𝗶𝗻𝘁 𝘁𝗵𝗲𝗶𝗿 𝗼𝘄𝗻 𝗱𝗲𝘀𝗶𝗴𝗻.

🧵 𝗔𝗥𝗘 𝗙𝗜𝗟𝗔𝗠𝗘𝗡𝗧𝗦/𝗠𝗔𝗧𝗘𝗥𝗜𝗔𝗟𝗦 𝗜𝗡𝗖𝗟𝗨𝗗𝗘𝗗?
Yes! 𝗣𝗿𝗶𝗻𝘁𝗶𝗻𝗴 𝗺𝗮𝘁𝗲𝗿𝗶𝗮𝗹𝘀 𝗮𝗿𝗲 𝗮𝗹𝗿𝗲𝗮𝗱𝘆 𝗶𝗻𝗰𝗹𝘂𝗱𝗲𝗱 in the ₱𝟮,𝟱𝟬𝟬 𝘄𝗼𝗿𝗸𝘀𝗵𝗼𝗽 𝗳𝗲𝗲.

📏 𝗔𝗥𝗘 𝗧𝗛𝗘𝗥𝗘 𝗣𝗥𝗜𝗡𝗧 𝗦𝗜𝗭𝗘 𝗟𝗜𝗠𝗜𝗧𝗦?
Maximum print size: 𝟮×𝟯 𝗶𝗻𝗰𝗵𝗲𝘀
Maximum print time: 𝟯𝟬 𝗺𝗶𝗻𝘂𝘁𝗲𝘀 𝗽𝗲𝗿 𝗽𝗮𝗿𝘁𝗶𝗰𝗶𝗽𝗮𝗻𝘁

🎁 𝗖𝗔𝗡 𝗣𝗔𝗥𝗧𝗜𝗖𝗜𝗣𝗔𝗡𝗧𝗦 𝗧𝗔𝗞𝗘 𝗛𝗢𝗠𝗘 𝗧𝗛𝗘𝗜𝗥 𝗣𝗥𝗜𝗡𝗧𝗦?
Yes! Participants can 𝗯𝗿𝗶𝗻𝗴 𝗵𝗼𝗺𝗲 𝘁𝗵𝗲𝗶𝗿 𝗳𝗶𝗻𝗶𝘀𝗵𝗲𝗱 𝟯𝗗 𝗽𝗿𝗶𝗻𝘁 𝗼𝘂𝘁𝗽𝘂𝘁𝘀.

🔄 𝗪𝗛𝗔𝗧 𝗜𝗙 𝗔 𝗣𝗥𝗜𝗡𝗧 𝗙𝗔𝗜𝗟𝗦?
No worries! We will 𝗿𝗲𝗽𝗿𝗶𝗻𝘁 𝘂𝗻𝘁𝗶𝗹 𝘁𝗵𝗲 𝗼𝗯𝗷𝗲𝗰𝘁 𝗶𝘀 𝘀𝘂𝗰𝗰𝗲𝘀𝘀𝗳𝘂𝗹𝗹𝘆 𝗰𝗼𝗺𝗽𝗹𝗲𝘁𝗲𝗱.

📂 𝗪𝗜𝗟𝗟 𝗦𝗧𝗨𝗗𝗘𝗡𝗧𝗦 𝗥𝗘𝗖𝗘𝗜𝗩𝗘 𝗖𝗢𝗣𝗜𝗘𝗦 𝗢𝗙 𝗧𝗛𝗘𝗜𝗥 𝗗𝗘𝗦𝗜𝗚𝗡𝗦?
Yes! Copies of the 𝗽𝗿𝗼𝗷𝗲𝗰𝘁 𝗳𝗶𝗹𝗲𝘀/𝗱𝗲𝘀𝗶𝗴𝗻𝘀 𝘄𝗶𝗹𝗹 𝗯𝗲 𝗽𝗿𝗼𝘃𝗶𝗱𝗲𝗱 𝗮𝗳𝘁𝗲𝗿𝘄𝗮𝗿𝗱.

✨ 𝗥𝗲𝗮𝗱𝘆 𝘁𝗼 𝘁𝘂𝗿𝗻 𝗶𝗺𝗮𝗴𝗶𝗻𝗮𝘁𝗶𝗼𝗻 𝗶𝗻𝘁𝗼 𝗿𝗲𝗮𝗹𝗶𝘁𝘆? 𝗝𝗼𝗶𝗻 𝘂𝘀 𝗳𝗼𝗿 𝟮 𝗲𝘅𝗰𝗶𝘁𝗶𝗻𝗴 𝗱𝗮𝘆𝘀 𝗼𝗳 𝗱𝗲𝘀𝗶𝗴𝗻𝗶𝗻𝗴, 𝗰𝗿𝗲𝗮𝘁𝗶𝗻𝗴, 𝗮𝗻𝗱 𝗽𝗿𝗶𝗻𝘁𝗶𝗻𝗴 𝘆𝗼𝘂𝗿 𝗼𝘄𝗻 𝟯𝗗 𝗺𝗼𝗱𝗲𝗹𝘀!

📅 𝗝𝘂𝗻𝗲 𝟭𝟳–𝟭𝟴, 𝟮𝟬𝟮𝟲
🕘 𝟵:𝟬𝟬 𝗔𝗠 – 𝟰:𝟬𝟬 𝗣𝗠
📍 𝗡𝗘𝗫𝗨𝗦 𝗔𝘁𝗿𝗶𝘂𝗺 & 𝗙𝗮𝗯𝗟𝗮𝗯
💰 𝗪𝗼𝗿𝗸𝘀𝗵𝗼𝗽 𝗙𝗲𝗲: ₱𝟮,𝟱𝟬𝟬

📩 𝗔𝗰𝗰𝗲𝘀𝘀 𝘁𝗵𝗲 𝗹𝗶𝗻𝗸 𝘁𝗼 𝗿𝗲𝗴𝗶𝘀𝘁𝗲𝗿: https://forms.gle/JnJedAkcuZu1vmUV9

NEWS: With its fatigue detection technology, DrowsiGuard was hailed as champion in the recently concluded NEXUS Innovation Summit 2026 held at the Nexus Atrium, May 18.

Read the full story via the link in the comment section.

🚀 𝗥𝗲𝗮𝗱𝘆 𝘁𝗼 𝘁𝘂𝗿𝗻 𝘆𝗼𝘂𝗿 𝗶𝗱𝗲𝗮𝘀 𝗶𝗻𝘁𝗼 𝗿𝗲𝗮𝗹, 𝘁𝗮𝗻𝗴𝗶𝗯𝗹𝗲 𝗰𝗿𝗲𝗮𝘁𝗶𝗼𝗻𝘀?

Join our 𝟮-𝗗𝗮𝘆 𝟯𝗗 𝗗𝗲𝘀𝗶𝗴𝗻 𝗮𝗻𝗱 𝗣𝗿𝗶𝗻𝘁𝗶𝗻𝗴 𝗦𝘂𝗺𝗺𝗲𝗿 𝗪𝗼𝗿𝗸𝘀𝗵𝗼𝗽 and unlock the exciting world of 𝟯𝗗 𝗠𝗼𝗱𝗲𝗹𝗶𝗻𝗴 𝗮𝗻𝗱 𝗔𝗱𝗱𝗶𝘁𝗶𝘃𝗲 𝗠𝗮𝗻𝘂𝗳𝗮𝗰𝘁𝘂𝗿𝗶𝗻𝗴! 🖨️✨

📅 𝗝𝘂𝗻𝗲 𝟭𝟳–𝟭𝟴, 𝟮𝟬𝟮𝟲
⏰ 𝟵:𝟬𝟬 𝗔𝗠 – 𝟰:𝟬𝟬 𝗣𝗠
📍 𝗡𝗘𝗫𝗨𝗦 𝗔𝘁𝗿𝗶𝘂𝗺 𝗮𝗻𝗱 𝗙𝗮𝗯𝗿𝗶𝗰𝗮𝘁𝗶𝗼𝗻 𝗟𝗮𝗯𝗼𝗿𝗮𝘁𝗼𝗿𝘆

👦👧 𝗢𝗽𝗲𝗻 𝗳𝗼𝗿 𝗮𝗹𝗹 𝗮𝗴𝗲𝘀, 𝗲𝘀𝗽𝗲𝗰𝗶𝗮𝗹𝗹𝘆 𝗹𝗲𝗮𝗿𝗻𝗲𝗿𝘀 𝗮𝗻𝗱 𝗮𝘀𝗽𝗶𝗿𝗶𝗻𝗴 𝗺𝗮𝗸𝗲𝗿𝘀 𝗮𝗴𝗲𝗱 𝟵–𝟭𝟴 𝘆𝗲𝗮𝗿𝘀 𝗼𝗹𝗱! Whether you’re a beginner, student, hobbyist, parent-and-child duo, or simply curious about technology, this workshop is designed to help you learn by creating.

💡 𝗪𝗵𝗮𝘁 𝘄𝗶𝗹𝗹 𝘆𝗼𝘂 𝗹𝗲𝗮𝗿𝗻?

🔹 𝗗𝗮𝘆 𝟭: 𝟯𝗗 𝗗𝗲𝘀𝗶𝗴𝗻 & 𝗠𝗼𝗱𝗲𝗹𝗶𝗻𝗴
Learn the fundamentals of 𝟯𝗗 𝗺𝗼𝗱𝗲𝗹𝗶𝗻𝗴 𝘂𝘀𝗶𝗻𝗴 𝗧𝗶𝗻𝗸𝗲𝗿𝗖𝗔𝗗 (𝗳𝗼𝗿 𝗸𝗶𝗱𝘀) 𝗮𝗻𝗱 𝗔𝘂𝘁𝗼𝗖𝗔𝗗 (𝗳𝗼𝗿 𝗮𝗱𝘃𝗮𝗻𝗰𝗲𝗱 𝘂𝘀𝗲𝗿𝘀), and prepare your designs for printing through 𝗖𝘂𝗿𝗮 and 𝗖𝗿𝗲𝗮𝗹𝗶𝘁𝘆 𝗣𝗿𝗶𝗻𝘁 slicing software.

🔹 𝗗𝗮𝘆 𝟮: 𝗛𝗮𝗻𝗱𝘀-𝗼𝗻 𝟯𝗗 𝗣𝗿𝗶𝗻𝘁𝗶𝗻𝗴 𝗘𝘅𝗽𝗲𝗿𝗶𝗲𝗻𝗰𝗲
Get actual experience operating professional 3D printers, including:
• 𝗨𝗹𝘁𝗶𝗺𝗮𝗸𝗲𝗿 𝟯
• 𝗨𝗹𝘁𝗶𝗺𝗮𝗸𝗲𝗿 𝟯 𝗘𝘅𝘁𝗲𝗻𝗱𝗲𝗱
• 𝗖𝗿𝗲𝗮𝗹𝗶𝘁𝘆 𝗞𝟮 𝗣𝗹𝘂𝘀

Bring your ideas to life by 𝗽𝗿𝗶𝗻𝘁𝗶𝗻𝗴 𝘆𝗼𝘂𝗿 𝘃𝗲𝗿𝘆 𝗼𝘄𝗻 𝗱𝗲𝘀𝗶𝗴𝗻! 🎨➡️🖨️

For only ₱𝟮,𝟱𝟬𝟬, gain practical skills in 𝟯𝗗 𝗱𝗲𝘀𝗶𝗴𝗻, 𝘀𝗹𝗶𝗰𝗶𝗻𝗴, 𝗮𝗻𝗱 𝗵𝗮𝗻𝗱𝘀-𝗼𝗻 𝗽𝗿𝗶𝗻𝘁𝗶𝗻𝗴—perfect for students, hobbyists, aspiring makers, and future innovators.

🎟️ 𝗟𝗶𝗺𝗶𝘁𝗲𝗱 𝘀𝗹𝗼𝘁𝘀 𝗮𝘃𝗮𝗶𝗹𝗮𝗯𝗹𝗲! 𝗦𝗲𝗰𝘂𝗿𝗲 𝘆𝗼𝘂𝗿𝘀 𝗻𝗼𝘄:
https://forms.gle/4A69mE1D2MwcVyQJ8

Nexus Summit 2026 Honors Lipa Lasallian Innovators DLSL hosts the Nexus Innovation Summit 2026, a dynamic arena where student-led concepts evolve into purpose-driven solutions for real-world challenges.

✨ From Ideas to Impact: The NEXUS Innovation Summit 2026 ✨

What began as concepts written on paper evolved into bold pitches, meaningful solutions, and powerful visions for the future. The recently concluded ✨NEXUS Innovation Summit 2026✨ was more than a competition—it was a celebration of innovation, collaboration, resilience, and the unwavering belief that young minds can create technologies and enterprises capable of transforming communities and industries.

We extend our deepest gratitude to our esteemed panel of judges whose expertise, wisdom, and encouragement inspired every participant to think beyond limitations and pursue excellence:

👩‍⚖️ Ms. Diane Angella Dugan-Eustaquio
👨‍⚖️ Mr. Primitivo Paypon Jr.
👨‍⚖️ Mr. Caezar Angelito Arceo
👨‍💼 Engr. Jeremy De Leon
👩‍🏫 Dr. Sheila Maloles

Your invaluable insights and commitment to nurturing innovation helped shape this milestone event into a truly meaningful learning experience for all.

We also proudly recognize the successful completers of the NEXUS Incubation Program under the NEXUS Enterprise Development Hub, headed by 👩‍💼 Engr. Aisa Mijeno-Labastilla, PCpE, with the strong support of 👨‍💼 Director Ruben Rubis of the NEXUS Innovation Labs and Intellectual Property Office. Your dedication to empowering innovators, fostering entrepreneurship, and building an ecosystem where ideas are transformed into sustainable ventures continues to inspire the next generation of changemakers.

🏆 Congratulations to the outstanding winners of the Pitching Competition:

🥇 CHAMPION — DrowsiGuard
🥈 1st Runner-Up — Braille Sense
🥉 2nd Runner-Up — Fit Fighter
🏅 3rd Runner-Up — Wastore

Every team who stood on that stage carried not only innovative ideas, but also courage, passion, and purpose. Whether you brought home an award or not, you have already taken the most important step: choosing to create solutions that matter.

As one summit concludes, a greater journey begins. May this event serve not as the finish line, but as the spark that ignites future startups, future technologies, and future leaders who will shape industries and uplift communities.

The future belongs to those courageous enough to build it. 🚀✨

🚀 𝗥𝗲𝗮𝗱𝘆 𝘁𝗼 𝗯𝗿𝗶𝗻𝗴 𝘆𝗼𝘂𝗿 𝗶𝗱𝗲𝗮𝘀 𝘁𝗼 𝗹𝗶𝗳𝗲?

The 𝗡𝗘𝗫𝗨𝗦 𝗜𝗻𝗻𝗼𝘃𝗮𝘁𝗶𝗼𝗻 𝗟𝗮𝗯𝘀 𝗮𝗻𝗱 𝗜𝗻𝘁𝗲𝗹𝗹𝗲𝗰𝘁𝘂𝗮𝗹 𝗣𝗿𝗼𝗽𝗲𝗿𝘁𝘆 𝗢𝗳𝗳𝗶𝗰𝗲 proudly invites students, faculty members, aspiring innovators, and even members of the public to join the ░3░D░ ░D░e░s░i░g░n░ ░a░n░d░ ░P░r░i░n░t░i░n░g░ ░S░u░m░m░e░r░ ░W░o░r░k░s░h░o░p░ — a hands-on learning experience in 🎨 𝟯𝗗 𝗺𝗼𝗱𝗲𝗹𝗶𝗻𝗴, 💻 𝗱𝗶𝗴𝗶𝘁𝗮𝗹 𝗱𝗲𝘀𝗶𝗴𝗻, and 🖨️ 𝗮𝗱𝗱𝗶𝘁𝗶𝘃𝗲 𝗺𝗮𝗻𝘂𝗳𝗮𝗰𝘁𝘂𝗿𝗶𝗻𝗴 𝘂𝘀𝗶𝗻𝗴 𝟯𝗗 𝗽𝗿𝗶𝗻𝘁𝗲𝗿𝘀.

Whether you’re a complete beginner or an enthusiast eager to explore the world of prototyping and fabrication, this workshop will equip you with practical skills and real-world exposure to modern 3D printing technologies and creative design workflows. 🔧✨

🔗 𝗥𝗲𝗴𝗶𝘀𝘁𝗿𝗮𝘁𝗶𝗼𝗻 𝗟𝗶𝗻𝗸: https://forms.gle/4A69mE1D2MwcVyQJ8
📅 𝗥𝗲𝗴𝗶𝘀𝘁𝗿𝗮𝘁𝗶𝗼𝗻 𝗗𝗲𝗮𝗱𝗹𝗶𝗻𝗲: June 15, 2026
📩 𝗙𝗼𝗿 𝗶𝗻𝗾𝘂𝗶𝗿𝗶𝗲𝘀: [email protected]

🚁☀️ From takeoff to touchdown — every flight tells a story.

The Drone Summer Training Program was more than just learning how to fly; it was about exploring innovation, building confidence, and seeing the world from a whole new perspective. 🌍📸

Through hands-on training, teamwork, and creativity, our participants transformed curiosity into skill and passion into action. Every captured frame reflects dedication, growth, and the future of aerial technology.

Here’s a glimpse of the moments that soared beyond expectations. ✨



🚀