EkomAmos GGS

EkomAmos GGS Builder of Structures. Builder of Minds. Builder of Nations. Civil Engineer | Entrepreneur | Founder of Gnobo Global Solutions (GGS’n)

13/09/2026

How much concrete do you need for a beam?

Look carefully at these two pictures.The first image is the architectural design/rendering of the house.The second image...
12/09/2026

Look carefully at these two pictures.

The first image is the architectural design/rendering of the house.

The second image is what I found when I returned to the site — after the client had gone back and made changes to the building.

I was the engineer responsible for the architectural coordination and structural design/construction work on this project. The building was constructed according to the approved architectural and structural design.

One particular area I paid serious attention to was the suspended entrance porch.

Because that entrance projection functions as a cantilevered structural element, its reinforcement and detailing were carefully considered. The reinforcement arrangement was provided based on the structural design, with the main tension reinforcement positioned appropriately for the cantilever action.

For the suspended beam, the reinforcement arrangement included 3 top reinforcement bars on one side and 2 bottom bars, with the corresponding arrangement provided on the other side, as detailed in the structural design.

Why is this important?

Because in a typical cantilever, the critical tension occurs at the top near the fixed/support region, so the reinforcement arrangement cannot simply be changed because someone says, “This is how we normally do it.”

The concrete was also produced using the specified mix proportions for the different structural elements, including the ratios used for the suspended beam and slab, in accordance with the project requirements.

Then I returned to site to commence the first-floor formwork.

That was when I saw the changes.

I asked my client:

“What happened here?”

His response was that people had been talking about the building, so he listened to what they were saying and made changes.

And this is exactly why I always tell clients:

DON’T LISTEN TO EVERYONE WHEN IT COMES TO STRUCTURAL WORK.

Your mason may have years of experience.

Your neighbour may have built three houses.

Your friend may have constructed a similar-looking building.

Someone at the site may say, “We always do it this way.”

But structural engineering is not based on “we always do it this way.”

It is based on design calculations, structural behaviour, loads, materials, detailing, standards, site conditions and professional judgment.

A building can look beautiful and still have structural problems.

And when you have already engaged a qualified professional, don’t undermine the design by allowing unqualified opinions to dictate structural modifications.

If you want to change something, call the engineer back.

Let the engineer assess the proposed modification and determine whether it is structurally acceptable.

Now I want your opinion. 👇

Looking at the original design and what was later done on site:

What do you think about the changes?

Was the client right to listen to other people’s opinions?

Or should the client have consulted the engineer before making the changes?

Engineers, builders, contractors and homeowners — I want to hear your professional opinion in the comments.

🏗️ Don’t compromise structural integrity because of public opinion.

Designed by professionals. Built with precision. Built to last.

— Engr. Ekom Amos | Gnobo Global Solutions (GGS’n)

10/09/2026

THE PEOPLE BEHIND EVERY STRUCTURE 🏗️❤️

Behind every beautiful building you see standing today, there are men and women who have carried blocks, mixed mortar, dug trenches, lifted materials, worked under the sun, and given their strength to make that structure a reality.

These are my workers—the people behind the work.

What you see in this picture is more than construction. It is a reminder that every honest labour deserves dignity and respect. These men are not just workers on my site; they are people with families, responsibilities, dreams, and people depending on them to bring something home at the end of the day.

They wake up early, come to site, get their hands dirty, sweat under the sun, and do the work that many people would never want to do—all in the pursuit of their daily bread.

As leaders, contractors, engineers, and employers, we must never forget the human beings behind the labour.

Pay them fairly.
Speak to them with respect.
Provide a safe working environment.
Appreciate their effort.
Give them water and reasonable breaks.
And most importantly, treat them as human beings—not machines.

Because the truth is simple:

You can have the best architectural drawings, the best materials, and the biggest project—but without the people who turn those plans into reality, nothing gets built.

To every hardworking construction worker out there hustling legitimately for a better life: I see you. I respect you. Keep pushing. Your labour is not in vain. 💪🏾🏗️

Builders don’t just build structures. We build people, families, communities, and ultimately, nations.

— Engineer Gnobo | Gnobo Global Solutions (GGS’n)

09/09/2026

Form work

05/09/2026

“Have you ever wondered why one side of a building has more block courses than the other? Let me show you the engineering behind it.”

゚

04/09/2026

You don’t need to know everything before you start.

You need enough courage to take the first step and enough discipline to keep learning.

Start small.

Start wisely.

Keep building. 🏗️

03/09/2026

“DON’T CAST YOUR FOUNDATION WITHOUT THIS! 👷🏾‍♂️”

29/08/2026

Happy convocation to me

25/08/2026

“If you want to start a business, stop asking:

‘What can I sell?’

Start asking:

‘What problem can I solve?’

Look around you.

People need better housing.

Businesses need better marketing.

Farmers need better access to markets.

Students need better learning resources.

Companies need people who can solve problems.

Every problem is an opportunity to create value.

But don’t just see a problem and immediately start a business.

First, understand the problem.

Find out who has it.

Find out what they’re currently doing.

Then create a solution people are willing to pay for.

That’s entrepreneurship.

Don’t chase money. Create value.”

📌 Caption

💡 Problems create opportunities.

The next business idea may already be around you.

Don’t ask:
“What business should I start?”

Ask:
“What problem can I solve?”

What problem do you see around you every day? 👇

23/08/2026

“You have an idea for a video but don’t know how to create it? Let me show you.”

#️⃣ Hashtags



🎙️ Video Script

“You have an idea for a video but don’t know how to create it? Let me show you.

First, take your idea and ask an AI tool to help you develop the concept.

Then ask it to create a short script.

Next, turn your script into scenes.

You can then use an AI video-generation tool to create the visual content.

Finally, add your own voice, editing and personality.

But here’s the important part:

Don’t let AI replace your thinking. Use AI to amplify your thinking.

I’m Ekom Amos.

Civil Engineer | Entrepreneur | AI Creator.

Think It. Build It. Scale It.”

Address

Uyo

Website

Alerts

Be the first to know and let us send you an email when EkomAmos GGS posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category