IDC Training House

The heavy lifting industry operates in high-stakes environments where safety, precision, and uptime are non-negotiable. Mobile cranes often work under extreme conditions — lifting multi-ton loads in adverse weather, on uneven terrain, or in tight urban spaces. A failure in such scenarios can be disastrous. That’s why proper inspection knowledge is essential. 🏗️⚠️

Come and join us for the TÜV/IICS 4.2 – Certified Mobile Crane Inspector (in reference to ASME B30.5 / ISO 23814) and gain practical knowledge in crane inspection, safety standards, defect identification, and industry best practices. 🏗️⚙️

📅 6–12 July 2026
📍 IDC Training House Sdn. Bhd., Puchong, Selangor
⏳ 7 Days Intensive Training
✅ 100% HRDC Claimable

📩 Secure your seat now before registration closes.

🔥 Advance Your Career in Refractory Inspection

Join the TÜV/IICS 2.4 Certified Refractory Inspector (in reference to API 936 & API 982)

✔ Internationally recognized certification

📅 08–14 June 2026
📍 IDC Training House Sdn. Bhd., Puchong, Selangor

📩 DM us for more info & registration details

Pressure Vessel
The 3 Most Common Types of Pressure Vessels

- Storage Vessels: Used to hold fluids (liquids or gases) such as petroleum or propane under pressure.

- Heat Exchangers: Used to manage heat by transferring it between fluids to control temperatures in chemical processing.

- Process Vessels (Reactors): Used in chemical plants to combine or break down components into new products, such as in reactors or distillation columns.

🚨 FINAL CALL: TÜV / IICS 2.1 Certified Pressure Vessel Inspector (in reference to API 510)

🎯 What You Will Learn:

- Visual and pressure testing techniques.
- Identifying cracks, corrosion, and defects.
- Compliance with safety standards.

📅 18–24 May 2026
📍 IDC Training House Sdn. Bhd., Puchong, Selangor

🔧 Centrifugal Pump – Technical Q&A ⚙️

Centrifugal pumps are among the most widely used machines in the engineering and industrial world. From oil & gas to manufacturing plants, they play a critical role in fluid handling systems.

However, poor understanding can lead to inefficiency, system failure, and costly downtime.

That’s why mastering the fundamentals is essential.

🎯 What You’ll Learn
✔ Pump design, selection & installation
✔ System hydraulics & performance
✔ Key components (seals, bearings, motors)
✔ Troubleshooting & maintenance

🚨 FINAL CALL: TÜV/TSCS 1.5 Certified Pump Practitioner

📅 18–22 May 2026
📍 IDC Training House Sdn. Bhd., Puchong, Selangor

Pump Troubleshooting: 5 Common Issues Every Chemical Engineer Should Know

Pumps are the lifeline of any chemical plant. Even a small malfunction can disrupt production, reduce efficiency, and lead to costly downtime.

Understanding common pump issues and how to address them is essential for engineers, and operators.

This infographic highlights 5 frequent pump problems in a clear Problem → Cause → Solution format:

1. Cavitation
V***r bubbles damaging the impeller.
Solution: Maintain proper NPSH and reduce suction lift.

2. Seal Leakage
Product loss and environmental hazards.
Solution: Inspect seals and replace worn components.

3. Vibration & Noise
Misalignment or worn bearings.
Solution: Perform alignment and routine maintenance checks.

4. Flow Rate Issues
Clogged suction or improper pump selection.
Solution: Check filters and optimize pump selection.

5. Overheating
Low cooling or excessive friction.
Solution: Monitor temperature and lubricate bearings.

💡Tip:
Regular monitoring and early detection can prevent major failures, reduce downtime, and extend pump lifespan.

🎓 Join the TUV / TSCS 1.5 Certified Pump Practitioner training and gain hands-on knowledge in pump operation, maintenance, and troubleshooting.

📅 18 – 22 May 2026
📍 IDC Training House, Puchong

Which pump issue do you encounter most often in real operations?

📌 Save this post for quick reference or share it with your team to improve plant reliability.

Most issues develop from operating conditions or improper maintenance. Early identification is critical to avoid system failure.

Common Pump Damages:

1. Cavitation – Bubble collapse causing surface pitting and efficiency loss
2. Corrosion – Material degradation due to the process environment
3. Seal Failure – Leakage and loss of containment
4. Bearing Damage – Vibration, noise, and reduced reliability

⚠️ If not addressed, these can lead to unplanned shutdowns, increased maintenance costs, and safety risks.
Improve your understanding of pump operation, maintenance, and troubleshooting through the TÜV/TSCS 1.5 Certified Pump Practitioner course.

📅 18 – 22 May 2026
📍 IDC Training House Sdn. Bhd., Puchong, Selangor
Find out more: https://www.idc-training.com/courseDetails.html?id=20/
📩 Secure your seat now before it's fully booked!
📧 [email protected]
📱 +603-8060 7720 | +603-8068 7720 | +603-8061 5172

The TUV / IICS 3.1 Certified Welding Inspector (in reference to API 577) is engineered for those who want to master the "why" behind the weld. We bridge the gap between visual inspection and metallurgical, ensuring you have the precision to prevent costly failures and lead quality control with absolute certainty.

TUV / IICS 3.1 Certified Welding Inspector (in reference to API 577)
📅 Date: 08 - 14 June 2026
📍 Venue: IDC Training House Sdn. Bhd., Puchong, Selangor

⏱️ Duration: 7 Days

✅ 100% HRDC Claimable and get International certification under TUV NORD / IHRC

🔗 Secure Your Technical Edge: https://www.idc-training.com/courseDetails.html?id=21

📧 Email: [email protected]
📱 Phone: +603 - 8060 7720 | +603-8068 7720 | +603-8061 5126