2D Basic Exercise 5
Open AutoCAD Software
1 UCS icon ကို Fit ထားျခင္း
Command : ucsicon (enter)> n (enter)
2 Horizontal Line
Command : XL (enter)> h (enter)> Dwg Area ေပၚ Point (Click) ခ်
3 Vertical Line
Command : XL (enter)> v (enter) > Dwg Area ေပၚ Point (Click) ခ်
4 Offset
Command: O (enter)> Offset တန္ဖိုးရိုက္ထည္႕ (enter)
5 Circle
Command : C (enter) > Center Point ျပ> Radius တန္ဖိုးရိုက္ထဲ႕ (enter)
6 Copy
CO (enter) > copy ကူးလိုသည္႕ object ကို Select > Base Point ေထာက္ > ခ်လိုသည္႕ ေနရာကို Click
7 Line
L (enter) > first Point ကို Click > Second Point ကို Click
8 Delete
ဖ်က္လိုေသာ Obj ကို Select > Delete
9 Trim
Tr (enter) > trim ထုတ္လိုေသာ Object နဲ႕ ထိေနတဲ႕ အပိုင္းကို Click (enter) > Trim ထုတ္လိုေသာ Object ကို Click
10 Chamfer
Cha (enter) > D (enter) > First Line Distant တန္ဖိုး ရိုက္ထည္႕ (enter) > second Line Distant တန္ဖိုးရိုက္ထည္႕ (enter)
11 Mirror
Mi (enter) > Object Select (enter) > direction ေရြး
12 Fillet
F (enter) > R (enter) > Radius တန္ဖိုး ရိုက္ထည္႕ (enter)
13 Dimension
Dimension > အေျဖာင့္တိုင္း တိုင္းလိုလွ်င္ (Linear)
Circle ကိုတိုင္းလိုလွ်င္ (Radius)
14 Dimension Setting (Changing Decimal to Fractional)
D (enter) > Modify > Primary Tab> Unit Format: Fractional
Precision : 01/32 > OK > Set Current > Close
PZ Engineering Training Center
Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from PZ Engineering Training Center, Education, Hledan, Kamayut.
20/10/2017
I. AutoCAD Course
( 2D, 3D & ISO )
Course Fee: 50000
II. Revit (MEP + ARCHI) Course
( Electrical System,Plumbing & Sanitary System, Fire Protection System & ACMV System)
Course Fee: 60000
Contact No: 09 424012671,09 973934867
Address: အမွတ္ 32။ စံပယ္ ၁ လမ္း ။ လွည္းတန္း။ ကမာရြတ္။
* Sat & Sunday Only
(9:30 -12:00 AM, 2:00- 4:30 PM & 5:30- 8:00 PM)
14/10/2017
Update Time-Table
* Thursday to Friday ( 6:30 PM - 8:00 PM)
* Sunday only (9:30AM -12:00 AM,
2:00PM - 4:30 PM & 5:30PM - 8:00 PM)
I. Revit (MEP + ARCHI) Course - 2 months
*******Electrical System, Plumbing & Sanitary System, Fire Protection System & ACMV System
Course Fee: 60000
II. Auto-CAD Course - 2 months
***** 2D / 3D / ISO
Course Fee: 50000
III. Computer Basic Course - 1.5 months
** MS Word, Excel, Power-point, E-Mail & Internet
Course Fee : 20000
One by one system ျဖင့္ သင္ႀကားေပးပါသည္
Contact no: 09 424012671,09 973934867
1. Revit (MEP + ARCHI) Course
( Electrical/Plumbing & Sanitary/Fire Protection/ACMV) - 60,000
2. Auto-CAD Course (2D/3D/ISO)- 50,000
3. Computer Basic Course - 20,000
One By One သင္ႀကားေပးပါသည္
Ph No: 09 424012671,09 973934867
Address: အမွတ္ 32။ စံပယ္ ၁ လမ္း ။ လွည္းတန္း။ ကမာရြတ္။
*Mon to Wed( 6:30PM-8:00PM)- 1 Month
*Thu to Fri ( 6:30PM-8:00 PM)- 1.5 Month
*Sat,& Sun (9:00AM-12:00 AM, 2:00PM-5:00PM & 5:30PM-8:00PM)- 1 Month
2D Basic Exercise -4
1. UCS icon ကို Fit ထားျခင္း
Command : ucsicon (enter)> n (enter)
2. Horizontal Line
Command : XL (enter)> h (enter)> Dwg Area ေပၚ Point (Click) ခ်
3. Vertical Line
Command : XL (enter)> v (enter) > Dwg Area ေပၚ Point (Click) ခ်
4. Offset
Command: O (enter)> Offset တန္ဖိုးရိုက္ထည္႕ (enter)
5. Circle
Command : C (enter) > Center Point ျပ> Radius တန္ဖိုးရိုက္ထဲ႕ (enter)
6. Copy
CO (enter) > copy ကူးလိုသည္႕ object ကို Select > Base Point ေထာက္ > ခ်လိုသည္႕ ေနရာကို Click
7. Delete
ဖ်က္လိုေသာ Obj ကို Select > Delete
8. Fillet
Command: F (enter)> R (enter) > Radius တန္ဖိုးရိုက္ထည္႕ (enter)
9. Trim
Tr (enter) > trim ထုတ္လိုေသာ Object နဲ႕ ထိေနတဲ႕ အပိုင္းကို Click (enter) > Trim ထုတ္လိုေသာ Object ကို Click
10. Dimension
Dimension > အေျဖာင့္တိုင္း တိုင္းလိုလွ်င္ (Linear)
Circle ကိုတိုင္းလိုလွ်င္ (Radius)
11. Dimension Setting (Changing Decimal to Fractional)
D (enter) > Modify > Primary Tab> Unit Format: Fractional
Precision : 01/32 > OK > Set Current > Close
2D Basic Exercise -3
1. UCS icon ကို Fit ထားျခင္း
Command : ucsicon (enter)> n (enter)
2. Horizontal Line
Command : XL (enter)> h (enter)> Dwg Area ေပၚ Point (Click) ခ်
3. Vertical Line
Command : XL (enter)> v (enter) > Dwg Area ေပၚ Point (Click) ခ်
4. Offset
Command: O (enter)> Offset တန္ဖိုးရိုက္ထည္႕ (enter)
5. Circle
Command : C (enter) > Center Point ျပ> Radius တန္ဖိုးရိုက္ထဲ႕ (enter)
C (enter) > Center Point ျပ> D (enter) > Diameter တန္ဖိုးရိုက္ထဲ႕ (enter)
6. Copy
CO (enter) > copy ကူးလိုသည္႕ object ကို Select > Base Point ေထာက္ > ခ်လိုသည္႕ ေနရာကို Click
7. Delete
ဖ်က္လိုေသာ Obj ကို Select > Delete
8. Fillet
Command: F (enter)> R (enter) > Radius တန္ဖိုးရိုက္ထည္႕ (enter)
9. Trim
Tr (enter) > trim ထုတ္လိုေသာ Object နဲ႕ ထိေနတဲ႕ အပိုင္းကို Click (enter) > Trim ထုတ္လိုေသာ Object ကို Click
10. Dimension
Dimension > အေျဖာင့္တိုင္း တိုင္းလိုလွ်င္ (Linear)
Circle ကိုတိုင္းလိုလွ်င္ (Radius)
Dimension Setting (Changing Decimal to Fractional)
D (enter) > Modify > Primary Tab> Unit Format: Fractional
Precision : 01/32 > OK > Set Current > Close
2D Basic Exercise -2
Open AutoCAD Software
1. UCS icon ကို Fit ထားျခင္း
Command : ucsicon (enter)> n (enter)
2. Horizontal Line
Command : XL (enter)> h (enter)> Dwg Area ေပၚ Point (Click) ခ်
3. Vertical Line
Command : XL (enter)> v (enter) > Dwg Area ေပၚ Point (Click) ခ်
4. Offset
Command: O (enter)> Offset တန္ဖိုးရိုက္ထည္႕ (enter)
5. Circle
Command : C (enter) > Center Point ျပ> Radius တန္ဖိုးရိုက္ထဲ႕ (enter)
6. Copy
CO (enter) > copy ကူးလိုသည္႕ object ကို Select > Base Point ေထာက္ > ခ်လိုသည္႕ ေနရာကို Click
7. Delete
ဖ်က္လိုေသာ Obj ကို Select > Delete
8. Fillet
Command: F (enter)> R (enter) > Radius တန္ဖိုးရိုက္ထည္႕ (enter)
9. Trim
Tr (enter) > trim ထုတ္လိုေသာ Object နဲ႕ ထိေနတဲ႕ အပိုင္းကို Click (enter) > Trim ထုတ္လိုေသာ Object ကို Click
10. Dimension
Dimension > အေျဖာင့္တိုင္း တိုင္းလိုလွ်င္ (Linear)
Circle ကိုတိုင္းလိုလွ်င္ (Radius)
11. Dimension Setting (Changing Decimal to Fractional)
D (enter) > Modify > Primary Tab> Unit Format: Fractional
Precision : 01/32 > OK > Set Current > Close
Auto-CAD 2D Basic Exercise -1
Open AutoCAD Software
1. UCS icon ကို Fit ထားျခင္း
Command : ucsicon (enter)> n (enter)
2. Horizontal Line
Command : XL (enter)> h (enter)> Dwg Area ေပၚ Point (Click) ခ်
3. Vertical Line
Command : XL (enter)> v (enter) > Dwg Area ေပၚ Point (Click) ခ်
Circle
Command : C (enter) > Center Point ျပ> Radius တန္ဖိုးရိုက္ထဲ႕ (enter)
4. Copy
CO (enter) > copy ကူးလိုသည္႕ object ကို Select > Base Point ေထာက္ > ခ်လိုသည္႕ ေနရာကို Click
5. Line
L (enter) > first Point ကို Click > Second Point ကို Click
6. Delete
ဖ်က္လိုေသာ Obj ကို Select > Delete
Trim
7. Tr (enter) > trim ထုတ္လိုေသာ Object နဲ႕ ထိေနတဲ႕ အပိုင္းကို Click (enter) > Trim ထုတ္လိုေသာ Object ကို Click
8. Dimension
Dimension > အေျဖာင့္တိုင္း တိုင္းလိုလွ်င္ (Linear)
Circle ကိုတိုင္းလိုလွ်င္ (Radius)
9. Dimension Setting (Changing Decimal to Fractional)
10. D (enter) > Modify > Primary Tab>
i. Unit Format: Fractional
ii. Precision : 01/32 > OK > Set Current > Close
Kinetic Micro Technology Co.,Ltd
Telecommunication and Surveillance System Installation and Supplier Co., တြင္ တာ၀န္ထမ္းေဆာင္ရန္
: 09-73183355 , 09-73822222
:
: အမွတ္-၃၃/က၊ ဒုတိယထပ္၊ ဗ်ဳိင္းေရအိုးစင္လမ္း၊ တာေမြၿမဳိ႕နယ္။
: company website
1. Sales and Customer Engineer F (2)Posts
24 Jun 2017 | Yangon | Full Time
Job Description
- Telecommunication ႏွင့္ပတ္သက္ေသာ ပစၥည္းမ်ားႏွင့္လံုၿခံဳေရးဆုိင္ရာေစာင့္ၾကည့္ေသာElectronic ပစၥည္းမ်ားအေၾကာင္းကိုစိတ္ပါ၀င္ စားသူဦးစားေပးမည္။ ႐ုပ္ရည္ေျပျပစ္ၿပီးလူအမ်ား ႏွင့္ေျပလည္ေအာင္ဆက္ဆံႏုိ- ႐ုပ္ရည္ေျပျပစ္ၿပီးလူအမ်ားႏွင့္ေျပလည္ေအာင္ ဆက္ဆံႏုိင္သူျဖစ္ရမည္။ ၀န္ထမ္းမ်ားကိုစီမံအုပ္ ခ်ဳပ္ႏုိင္သူ၊ လုပ္ငန္းမ်ားအခ်ိန္မီၿပီးစီးေအာင္တာ ၀န္ယူေစခိုင္းႏုိင္သူျဖစ္ရမည္။ ႐ံုးလုပ္ငန္းမ်ားကို ကူညီလုပ္ကိုင္ေပးရမည္။ စာစီစာ႐ိုက္ကြၽမ္းက်င္ သူျဖစ္ရမည္။ အနိမ့္ဆံုးပညာအရည္အခ်င္းဘြဲ႕ရ ၿပီးသူျဖစ္ရမည္။ ႐ံုးလုပ္ငန္းစီမံခန္႔ခြဲမႈအေတြ႕အ ႀကံဳ၃ႏွစ္ရွိရမည္။ လုပ္ငန္းအေနအထားအရ အသက္၂၆မွ၃၅ႏွစ္ၾကားျဖစ္ရမည္။င္သူျဖစ္ရမည္။ ႐ံုး လုပ္ငန္းမ်ားကိုကူညီလုပ္ကိုင္ေပးရမည္။ စာစီစာ ႐ိုက္ကြၽမ္းက်င္သူျဖစ္ရမည္။Electronics ပစၥည္း မ်ားေရာင္းခ်ျခင္းအေတြ႕အႀကံဳ၁ႏွစ္ရွိရမည္။
-Engineer BE (Electronics/ Electrical Power/ IT/ Mechatronics) ဘြဲ႕ရၿပီးသူျဖစ္ရ မည္။ ရာထူးအားလံုးအတြက္ စမ္းသပ္ကာလ(၃)ၿပီးဆံုး ၍ အမွန္တကယ္အလုပ္ႀကိဳးစားသူ၊ လုပ္ငန္း ကြၽမ္းက်င္သူ ျဖစ္လာပါက လစာေကာင္းေကာင္း ေပးမည္။
Jasmine Palace Hotel (from opportunity journal)
: 01 2304402, 01 539961
: [email protected]
: No.341, Pyay Road, Sanchaung Township
: company website
1. Assistance Chief Engineer M (1)post
30 Jun 2017 | Yangon | Full Time
Job Description
- BE / AGTI ( Mechanical & Electrical )
- Minimum 5 years’ experience in Hotel engineering management field.
- Electrical, Chiller system, Plumbing & Sanitary, Knowledge of M&E working.
- English (4 ) skills. Age above 35 years
Requirement
- Hotel chief engineers supervise the operation, maintenance, and repair of hotel equipment, tools, and facilities. They generally oversee the maintenance staff and may work in both an office setting and on the property, addressing HVAC and other types of issues fire system and ELV control system. In addition to maintenance duties, these professionals may also work with contractors to coordinate renovations and able to work under pressure.
EZee Hospitality Software Myanmar Co., Ltd ( from opportunity journal)
: 09 970 9933 23
: Email:[email protected]
: No 169/B, Room 6, 1st Floor, Kabaraye Pagoda Road,Mayangone Township Yangon.
Application Support Engineer - (4) posts
24 Jun 2017 | Yangon | Full Time
Job Description
Full-time job
Requirements
- Able to communicate with English & Burmese
- Able to travel alone
- Prefer knowledge in supporting & troubleshooting in window/mobile application
- Prefer knowledge in Networking & Installing Software
- Fresh Graduates are welcome & we will provide training first
- Application Support Engineers provide initial installation, remedial and preventive maintenance, product updates, migrations and pre-sale technical assessments and recommendations as well as technical support for technical and non-technical personnel. They may handle project management for accounts, be involved in critical account situations, and assist with customer and/or internal training. They are responsible to building custom integrations or tools. The Application Support Engineer is the go-to resource for implementations involving challenging technical problems requiring custom solution. To apply or enquiry, please email to above address
SONNENBERG SERVICES COMPANY LIMITED (from opportunity journal)
: Ph:95-1-551080
: Email:[email protected]
: 12,Ayarwun Yeiktha, Ayarwun Road, Thaketa, P.O Yangon ေက်ာက္တိုင္မွတ္တိုင္။
: company website
1. Operation Asst; Engineer- F (2)Posts
24 Jun 2017 | Yangon | Full Time
Job Description
-AGTI, B.Tech, EP ၊အသက္(၂၅)ႏွစ္မွ(၃၅)ႏွစ္ အတြင္း
-Industrial & Marine Generator Electrical ပိုင္းအေတြ႕အႀကံဳ(၅)ႏွစ္ႏွင့္အထက္ရွိ သူ
-English 4 skills ကြၽမ္းက်င္၊ Computer ျမန္္မာ၊ အဂၤလိပ္ လက္ကြက္ရEmail, Internet, Word, Excel ကြၽမ္းက်င္
- နယ္သို႔ခရီးသြားႏိုင္ရမည္။
- အေျခခံလစာ(4-6)lakh
စိတ္ပါ၀င္စားသူမ်ားသည္ လိုင္စင္ဓာတ္ပံု(၁)ပံု၊ CV Form ၊ မွတ္ပံုတင္မိတၱဴ၊ အလုပ္သမား မွတ္ ပံုတင္မိတၱဴ၊ ပညာအရည္အခ်င္းႏွင့္ Certificate မ်ား၊ ရပ္ကြက္ေထာက္ခံစာမိတၱဴ၊ ရဲစခန္းေထာက္ ခံစာမိတၱဴ၊ သန္းေခါင္စာရင္းမိတၱဴအျပည့္အစံုျဖင့္ လူကိုယ္ တိုင္လာေရာက္ေလွ်ာက္ထားႏိုင္ပါသည္။ မွတ္ခ်က္- Companyမွ ခ်မွတ္ထားေသာ စည္း မ်ဥ္းစည္းကမ္းမ်ား ဖတ္႐ႈႏိုင္ေစရန္ စာရြက္ စာတမ္းအျပည့္အစံုျဖင့္လူကိုယ္တိုင္လာေရာက္ ေလွ်ာက္ထားရန္။Email ျဖင့္ေလွ်ာက္ထား ေသာCV Form မ်ားအား လက္ခံမည္မဟုတ္ပါ။ ေရြးခ်ယ္မခံရေသာ ၊အင္တာဗ်ဴးမေအာင္ေသာ CV Form မ်ားအား ျပန္ေပးမည္မဟုတ္ပါ။
Click here to claim your Sponsored Listing.
Location
Category
Telephone
Website
Address
Kamayut