BIM Inotion CM Plus

(FIDIC) is an acronym for "Federation Internationale Des Ingenieurs-Conseils", which means the international federation of consulting engineers.
The international standards organization is well known for publishing Suite of Contracts for engineering and construction.

📕Red Book is the standard, and most commonly used, construction contract form in all projects where the design is provided by the Employer, following the traditional procurement route of Design, Bid and Build. The Contractor is paid on a measurement basis for the actual quantities of work performed.

📓Silver Book which refers to Conditions of Contract for EPC/Turnkey Projects. The Silver Book is recommended for turnkey provision of process or power plants, factories and/or infrastructure when the Employer wishes the maximum degree of certainty in terms of costs and time of the works and intends to have the Contractors entirely responsible (and liable) for the design and ex*****on of the Works.

📒Yellow Book is the recommended "design and build document for projects where the employer wishes to protect its interests by appointing an engineer to supervise the overall construction of the works, notwithstanding that the overall responsibility for design lies with the contractor".
In the ordinary course, the contractor designs and provides, according to the client's requirements, plant and/or other works which may include a combination of civil, mechanical, electrical and/or construction works.

📗Green Book is a short form of contract and is recommended for engineering and building works of a smaller scale. A maximum of USD$500,000 and a six-month construction period was initially considered as a reasonable limit on the capital value and duration.
However, the World Bank has suggested its use for contract values up to USD$10 million. Depending on the type of works, the Green Book may be suitable for contracts of considerably greater value. Also, it is considered more likely to be suitable for fairly simple or repetitive work or work of a short duration without the need for specialist subcontracts.

📒Gold Book being a contract form where the design is made by the Contractor. Additionally the Contractor assumes the responsibility for the construction and the operation of the Works.
The Gold Book adopts a "green-field" DBO scenario with a 20-year operation period and a single contract awarded to a single contracting entity (which will almost certainly be a joint venture or consortium) to optimize the coordination of innovation, quality, and performance.
The Contractor is not responsible for the project's funding or eventual commercial success under the DBO contract.

📔Pink Book: The Multilateral Development Banks (MDBs) Harmonized Edition of the Red Book.
In using the FIDIC Conditions it has been the regular practice of the MDBs to introduce additional Clauses in the Conditions of Particular Application (or “Particular Conditions”) in order to amend provisions contained in the FIDIC General Conditions. These additional clauses in many cases have standard wording which has to be repeated whenever procurement documents are being prepared for a new project. Furthermore, the provisions in bid documents, including the additional clauses contained in the Particular Conditions, varied between the MDBs, and this created inefficiencies and uncertainties amongst the users of the documents, and increased the possibilities for disputes.

📙has developed model forms for two types of associations between services suppliers – this Model Joint Venture Agreement and a Model Sub-Consultancy Agreement.
These two model forms of agreement are compatible with the 2017 fifth edition of FIDIC’s “Client/Consultant Model Services Agreement” (the White Book).
This model Joint Venture Agreement will allow the parties to agree, on a project-specific basis, their obligations, services and rewards within the Joint Venture created among them by the effect of this Model Joint Venture Agreement. It is not intended to create a legal entity or to be used to create a more permanent non-project specific legal association.

📌ຮັບທຸກໜ້າວຽກ ແຕ້ມແບບ ອອກແບບສະຖາປັດ ວິເຄາະໂຄງສ້າງ
ຮັບຂື້ນໂມເດວທຸກລະບົບ ສະຖາປັດ ໂຄງສ້າງ ລະບົບ MEPF ຮັບທັງ project .ໃຫຍ່ໜອ້ຍ ຮອດອາຄານສູງ

📌ຂື້ນ Model ດວ້ຍ Revit 💯

📌ຮັບເຮັດແບບ As-Built Drawings

📌ຮັບຖອດປະລິມານວັດສະດຸ ຈັດທຳລາຍການ BOQ

📌ຮັບກວດສອບລາຍການ BOQ

📌ຮັບກວດສອບ (Audit) ໂຄງການກໍ່ສ້າງ

📌ຮັບວ່າງແຜນ ເວລາ ແລະ ແຜນການກໍ່ສ້າງ ການວາງແຜນຕົ້ນທຶນ ດວ້ຍ Microsoft Projec ແລະ Primavera P6

📌ໃຫ້ຄຳປືກສາດ້ານການຄວບຄຸມຕົ້ນທຶນ ແລະ ຄວບຄຸມໂຄງການ ຫາກທ່ານບໍມີເວລາຕິດຕາມດູແລໂຄງການດວ້ຍຕົວເອງ ໃຫ້ເຮົາເປັນຄົນຄວບຄຸມຄຸນນະພາບໂຄງການກໍ່ສ້າງຂອງທ່ານເພື່ອໄດ້ໂຄງການທີ່ດີແລະມີຄຸນນະພາບໄດ້ມາດຕະຖານ

ສາມາດຕິດຕໍ່ສອບຖາມລາຍລະອຽດໄດ້ທີ່ 020 94 425 007

Gmail: [email protected]

Facbook BIM Inotion CM Plus

ຮູບແບບຄວາມສຳພັນລະຫວ່າງກິດຈະກຳໃນ Microsoft project
Telationships Type in Microsoft project

Finish to Start (FS)
ຄວາມສຳພັນແບບສຳເລັດແລ້ວເລີ້ມ
Start to Start (SS)
ຄວາມສຳພັນແບບເລີ້ມພອ້ມກັນ
Finish to Finish (FF)
ຄວາມສຳພັນແບບສຳເລັດພອ້ມກັນ
Start to Finish (SF)
ຄວາມສຳພັນແບບສຳເລັດໄດ້ເມື່ອເລີ້ມ
BIM Inotion CM Plus


planning

P6
project for construction

ຊິມີຄົນຮຽນຢູ່ບໍ😅
ເອົາຄ່າຄອສຮຽນເທົ່າໃດດີ ?5555

Revit inotion to BIM Inotion
ເປີດຮັບຊຸດໃໝ່ ເລີ້ມຮຽຽນເດືອນ3/2026
📢ເປີດສອນຫຼັກສູດແຕ້ມແບບກໍ່ສ້າງຄົບຊຸດໃນ Program Revit 2026. ທ່ານໃດທີ່ຢາກເຮັດວຽກແບບມືອາຊີບຫ້າມພາດ!!
____
➡️ສໍາລັບ 5 ທ່ານທຳອິດແມ່ນເອົາຄອສຄົບຊຸດນີ້ໄປເລີຍໃນລາຄາ 2,399,000₭/ທ່ານ⬅️
ການຮຽນ-ການສອນແບ່ງອອກເປັນ 2 ພາກດັ່ງນີ້:
-ພາກຈັນ-ສຸກ ເວລາຮຽນ: 18:00-20:00
-ພາກເສົາ-ທິດ ເວລາຮຽນ: 8:30-12:30
(ຮັບພຽງ 8ຄົນ/ຊຸດ. ແຕ່ລະຊຸດໃຊ້ເວລາຮຽນ 45-50ຊົ່ວໂມງ)
ສະຖານທີ່ຮຽນຕົວຈິງບ້ານ ໜອງວຽງຄໍາ, ເມືອງ ໄຊທານີ, ນະຄອນຫຼວງວຽງຈັນ
https://maps.app.goo.gl/jb9SnTgi6imbkgMi7
---
📝ບົດຮຽນທີ່ສອນມີດັ່ງນີ້👇🏻:
☑️ ແຕ້ມແບບໂຄງສ້າງ Revit Structure
☑️ແຕ້ມແບບສະຖາປັດ Revit Architecture
☑️ ແຕ້ມແບບລະບົບ Revit MEP (ໄຟຟ້າ+ສຸຂາພິບານ)
☑️ ສອນແຕ້ມໂມເດວ 3D ເຮືອນ 2 ຊັ້ນ ໃຫ້ຖືກຕ້ອງຕາມ BIM Model
☑️ ສອນການເຮັດ Shop drawing 2D ແລະ 3D ໃນ Revit ລະອຽດຄົບຊຸດ
☑️ ສອນການຖອດບໍລິມາດວຽກຕ່າງໆໃນ Revit ຢ່າງລະອຽດ
☑️ ສອນປະມານລາຄາ Revit-Excel ຢ່າງລະອຽດ
☑️ ສອນການສ້າງ Family ຕ່າງໆເຊັ່ນ: Door, Window, Title block ແລະ ອື່ນໆກ່ຽວຂ້ອງງານກໍ່ສ້າງ
☑️ ສອນການສະໝັກເຂົ້າເວັບໄຊຕ່າງໆເພື່ອດາວໂຫຼດ Family Revit.
☑️ ສອນ Link Revit to Lumion ເພື່ອສ້າງພາບສົມຈິງ
☑️ ສອນເຂົ້າເວບໄຊຕ່າງໆທີ່ພົວພັນກ່ຽວຂ້ອງກັບ BIM
---
📖ສີ່ງທີ່ໄດ້ຮັບ👇🏻:
➡️ຕົວໂປຣແກມ Revit ຈາກ BIM In Revit
➡️Template ແຕ້ມແບບຄົບຊຸດໃນ Revit
➡️ປັກອີນເສີມ Revit to Lumion ແລະ D5
➡️ ຫຼັງຈາກຈົບຫຼັກສູດນີ້ຮັບປະກັນໃຊ້ Revit ເປັນ 100%
➡️Standard Drawing ຕ່າງໆໃນ Revit
➡️ Familyຄົບທຸກຢ່າງທຸກງານໃນRevit
➡️ ແຖມຟາຍປະມານລາຄາເຮືອນ 1 ຊັ້ນ ແລະ 2ຊັ້ນຄົບທຸກງານ ເປັນຟາຍ Excel
➡️ແຖມຄອສອອນໄລໃນລາຄາ 1,199,000ກີບໃຫ້ພ້ອມ
➡️ແຖມ model ຄອສອອນໄລໃຫ້ພ້ອມ
➡️ຫຼັງຮຽນຈົບມີໃບຢັ້ງຢືນໃຫ້ພ້ອມ
#ຄ່າຮຽນ:
-ລາຄາ: 2,499,000ກີບ/ທ່ານ ສາມາດເຂົ້າຮຽນໄດ້ຕະຫລອດຊີບ.
-ລາຄາຮຽນຄອສອອນລາຍ: 1,199,000ກີບ/ທ່ານ ສາມາດເຂົ້າຮຽນໄດ້ຕະຫລອດຊີບ
ນອກຈາກສອນແລ້ວຍັງຮັບອອກແບບ, ແຕ້ມແບບຄົບຊຸດ.
#ຕິດຕໍ່:
📞ແອັບ ແລະ ໂທ: 020 78 681 236 02094425007

Training by: khamsouk Chandone

BIM Building infromationt modelling ຊວ່ຍຫຍັງໃນການບໍລິຫານການກໍ່ສ້າງ

Pool VILLA

ຖ້າບໍ່ວາງເຮັດບໍ່ໄດ້ໃຊ້ເວລາຂື້ນ3ຊົ່ວໂມງ
ພັດທະນາຕົວເອງໄປເລື່ອຍໆ
ຮັບອອກແບບ ຮັບຂື້ນໂມເດວ3D ຂຽນແບບກໍ່ສ້າງ ດວ້ຍ Revit
ຮັບເຮັດແຜນການກໍ່ສ້າງລະອຽດທຸກຂັ້ນຕອນ
ສົນໃຈຕິດຕໍ່ລົມກັນໄດ້ 02094425007

Lift Model by revit