HYDRONIC FORMULA IN metric system
Q = m Cp dT
Q = m * Cp * dT
heat = mass flow * specific heat capacity * temperature difference
kW = l/s * J/g °C * °C
The mass flow rate m [l/s] is a measurement of the amount of water flowing around the chilled water loop.
The specific heat capacity Cp [J/g °C] is a thermodynamic property specific of the fluid used to transfer heat. We could manipulate the specific heat capacity only by changing the fluid used in the loop. (The specific heat of water is 1 calorie/gram °C = 4.186 joule/gram °C )
Water is a good fluid choice for cost and safety considerations. The specific heat capacity of water does vary with temperature but for the scope of a chilled water loop it is essentially constant.
The temperature difference dT [°C] is the difference in chilled water supply and chilled water return.
Optimization of a chilled water loop requires correctly setting the flow rate and temperature. We could use a high mass flow rate and low temperature difference. We could also use a low mass flow rate with a high temperature difference.
A low mass flow with high temperature difference is optimal and will reduce our capital & operating costs. A low mass flow rate minimizes the amount of electricity required to pump water around the loop.
A high temperature difference leads to:
• Increase in the maximum capacity of the loop to deliver heat. Pipe size limits the capacity of the loop by limiting the maximum flow rate. More heat can be transferred at the maximum flow rate by using a larger temperature difference.
• Maximizes heat recovery from CHP heat sources such as jacket water or exhaust.
• Maximizes electric output from steam turbine based systems by allowing a lower condenser pressure.
The capital cost benefit comes from being able to either transfer more heat for the same amount of investment or to install smaller diameter pipework.
The operating cost benefit arises from reduced pump electricity consumption and increased CHP system efficiency.
Thanks for reading!
Kumar Institute of Plumbing & HVAC Design
Nearby schools & colleges
Business Bay
Al Barsha
Suite
Al Qusais
Dubai
25314
Plumbing & HVAC design
Operating as usual
Click here to claim your Sponsored Listing.
Location
Category
Website
Address
Dubai
Opening Hours
Monday | 09:00 - 17:00 |
Tuesday | 09:00 - 17:00 |
Wednesday | 09:00 - 17:00 |
Thursday | 09:00 - 17:00 |
Friday | 09:00 - 17:00 |
Saturday | 09:00 - 17:00 |
Alamal Street Business Bay Dubai
Dubai, 500001
Welcome to Premiere art school, the premiere destination for aspiring graphic designers
Onyx Tower 2, Office P204 & P205, The Greens
Dubai, 450355
CAPP was founded in 2005 in Dubai with the sole purpose of delivering excellence in Dental Education
Dubai, 74800
like this page, send us your postal address and get free 3D glasses!
Dubai World Trade Centre
Dubai
UAE's only exhibition & conference dedicated to the entire spectrum of education solutions from pre-
Jumeirah Road Pavilion Dive Centre
Dubai
Tawasul means reach out in Arabic. It aims to engage young people and students in grass root conservation and restoration ecology.
Al Barsha Business Centre Office 611
Dubai
Marine Concept provides IYT maritime training, U.A.E. local and international boat driving licenses
Bedaia Building, Al Barsha
Dubai, P.O.BOX283681
تسعى بذور الى تنمية حب اللغة العربية عند الأطفال. بذور ?
Dubai
Put your values into action. We work with select organizations, governments and brands, to create em
Dubai
App connects donors,education organizations and students to crowdfund for education. Donor selects student profiles, pays schools tuition.